"Milwaukee Chipper Hammer — 3450 BPM, 13 Amp, Model# 5336-22" @ NorthernTool supplies, tools & equipment store

24Hour-Store.com Online shopping mall



 

Search For:


"Milwaukee Chipper Hammer — 3450 BPM, 13 Amp, Model# 5336-22"

"Milwaukees Spline Drive Chipping Hammer is designed for reliable performance for mortar removal and light demolition work. The 13 amp motor offers an electronic feedback control circuit which delivers soft start, maintains speeds under load and provides reserve power for more demanding applications. All handle surfaces are cushioned to further absorb vibration and offer a more comfortable grip. Standard 3/4 hex/round shank chisels and demolition iron can be used in this chipping hammer. Voltage 120 AC Only; 13 AmpsDial speed control: 1300-3450 bpmPatented Vibration Isolation System (both grips)Accepts round/hex shank accessoriesBlow Energy 8.6 ft.-lbs.Quick-change side handle, front and rear mounting positionsBit Shank Type: Round Hex9 ft. Fixed CordIncludes 12in. bull point, 1in. x 12in. flat chisel, 3in. x 12in. scaling chisel, and carrying caseModel 5336-22U.S.A."
Manufacturer: Milwaukee
SKU: M0129
Category: Power Tools


Hi-Lo Hitch Ball Mount

Fits 2in. square receiver. 1in. ball shank. bushing included. Order pin #33053 separately. U.S.A. Gross Load: 6000 lbs. Tongue Load: 600 lbs. Maximum Lift: 2 3/4in. Maximum Drop: 4in. Shank: 8in.L
Manufacturer: Northern Tool and Equipment
SKU: 33050
Category: Towing


AO Safety Impact Goggle

Protects eyes from flying chips and particles. Direct ventilation with polycarbonate lens. Fits over most personal glasses. Fully adjustable and flame retardant headband. Meets ANSI Z87.1–1989. U.S.A.
Manufacturer: AO Safety
SKU: 174631
Category: Safety


Master Lock U-Lock

"Strong 3 11/16in.W steel lock body is ideal for use with heavy-duty cable and chain. Hardened steel, double-locking shackle. 7-pin tumbler. Vinyl-covered body and shackle. 2-year limited warranty."
Manufacturer: Master Lock
SKU: 178681
Category: Security Equipment


Polypropylene Hose Barb

Recommended operating pressure: 100 PSI @ 0°F; 125 PSI @ 70°F; 70 PSI @ 150°F. 1in Size
Manufacturer: Norwesco
SKU: 56714
Category: Water Pumps


Haldex High Performance Gear Pump 1.159 Cu. In.

"Compact, high performance package is constructed of high strength aluminum housing with cast iron end covers. Ideal for a wide variety of applications such as material handling, aerial lifts, turf care, agriculture and construction. Low-noise pumps have SAE ""A"" 2-bolt mounts and SAE O-ring side ports. U.S.A. W900 Series: 90% efficiency, 3/4in. keyed shaft. Displacement Cubic In.: 1.159 Maximum Flow at 1800 RPM: 8.95 Maximum Flow at 3600 RPM: 17.9 Maximum PSI Cont.: 4000 Maximum PSI Inter.: 4400 Maximum RPM at 4000 PSI: 3000 Outlet: 11/16in.-12 Rotation: CW"
Manufacturer: Haldex Barnes Hydraulics
SKU: 10601
Category: Hydraulics


GearWrench 25mm Standard Ratcheting Combination Wrench

"The small ratcheting box end design allows access to tight spots where a ratchet and socket or a conventional racheting box end will not fit. The GearWrench™ moves a fastener along any length threaded rod without ever having to remove the wrench from the fastener. Surface Drive box end virtually eliminates the rounding of fasteners. Limited lifetime warranty. 25mm standard combination GearWrenchAll metal constructionFully hardened with nickel-chrome plated mirror finishMeets or exceeds ANSI, DIN and federal torque specificationsGearWrench needs as little as 5° to move a fastener, a standard 12 point wrench requires 30° or six times the roomLimited lifetime warranty"
Manufacturer: GearWrench
SKU: 558029
Category: Hand Tools


"IIT Air Regulator With Gauge — 1/4in. Fitting, 160 PSI"

Adjustable from 0-160 PSI Built-in gauge 1/4in. NPT fittings
Manufacturer: IIT
SKU: 1991618
Category: Air Tools






© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.