"DEWALT Chop Saw — 14in. Dia., Model# DW871" @ NorthernTool supplies, tools & equipment store
"DEWALT Chop Saw — 14in. Dia., Model# DW871"
"This power–packed saw has an extra–large metal cutting capacity, handling up to 2 9/16in. bar stock and 5in. pipe. 5.3 HP motor draws 15 Amps. Patented tool-free, 45° adjustable fence allows for fast and accurate angle cuts without using a " Manufacturer: DEWALT SKU: 399781 Category: Power Tools
Wilmar Piston Ring Installer
Install and remove piston rings from 3/64in. to 1/4in. Manufacturer: Northern Tool and Equipment SKU: 909392 Category: Automotive
ALC 50-Lb. Capacity Suction Abrasive Blaster
"Completely portable and easily carried from job to job. Has a 45 to 50-lb. abrasive container. Includes: Siphon powered blastgun with 1/4in. (15cfm) steel nozzle and 7ft. hose. Optional nozzles available 7 cfm and 20 CFM. Minimum operating cfm required is 7 CFM @ 80 PSI. Optional safety equipment available: Hood, Goggles and Gloves ALC" Manufacturer: ALC SKU: 1554 Category: Sandblasters
4in. x 2in. Fairbanks Swivel Weldless Caster
One-piece construction eliminates stress build-up. Double ball bearings and seal ring keep lubrication in and dirt out. Corrosion-resistant grey epoxy finish. 2 5/8in. to 3in. x 3in. to 3 5/8in. bolt hole spacing. 3/4in. king pin. Top plate size 4in. x 4 1/2in. Caster has a roller bearing. U.S.A. Wheel Size: 4in. x 2in.Mount Height: 5 5/8in.Capacity: 500 Lbs.Bolt Pattern: 2 5/8in. to 3in. x 3in. to 3 5/8in.Top Plate: 4in. x 4 1/2in.Wheel Type: SwivelZinc-Plated Forks with Polyurethane Tread/Polyethylene Core Wheels Manufacturer: Fairbanks SKU: 189963 Category: Casters
TAP Wiring Kit for Ford Windstar 1999-2000
TAP Wiring Kit for Ford Windstar 1999-2000 Manufacturer: TAP SKU: 630615 Category: Towing
"Northern Industrial Tools Straight Line Air Drill — 3/8in, 2500 RPM, 3 CFM"
"2500 RPM; 3 CFM; 90 PSI 1/4in. air inlet, 3/8in. min. hose size Ball bearing construction; lever throttle Just 8 3/4in. long" Manufacturer: Northern Industrial Tools SKU: 11284 Category: Air Tools
GearWrench 13/16in. Standard Ratcheting Combination Wrench
"The small ratcheting box end design allows access to tight spots where a ratchet and socket or a conventional racheting box end will not fit. The GearWrench™ moves a fastener along any length threaded rod without ever having to remove the wrench from the fastener. Surface Drive box end virtually eliminates the rounding of fasteners. Limited lifetime warranty 13/16in. standard combination GearWrenchAll metal constructionFully hardened with nickel-chrome plated mirror finishMeets or exceeds ANSI, DIN and federal torque specificationsGearWrench needs as little as 5° to move a fastener, a standard 12 point wrench requires 30° or six times the roomLimited lifetime warranty" Manufacturer: GearWrench SKU: 558009 Category: Hand Tools
Leeson Reversible Electric Motor With Automatic Overload Protection — 1/3 HP
"1/3 HP motor is great for general purposes and includes a rigid base and capacitor start. Automatic overload protection ensures long lasting use. Single phase motor has 1725 RPM, NEMA frame #S56, and 5/8in. shaft. U.S.A." Manufacturer: Leeson SKU: 16117333 Category: Electrical
