Component for tractor three-point hitch system. This PTO Top Link is built to ASAE specifications. Maximum Drawbar Horsepower: up to 20Top Link Pin Diameter: 5/8 in.Pull or Draw Pin Diameter: 5/8 in.Standard Lift Arm Spacing: 20 in. Manufacturer: Northern Tool and Equipment SKU: 2501900 Category: Ag Equipment + Excavating
"Makita Flashlight — 9.6 Volt, Model# ML902"
"Uses the same battery and charger as other 9.6V Makita toolsUp to 2 hours of continuous illumination from a single charge4 Position flashlight head; 0°, 45°, 90°, 110°Uses 9.6V batteries 9000 or 9033Replacement bulb stores in head for convenience12 13/16in. overall lengthBattery and charger sold separatelyIncludes 2 flashlight bulbs" Manufacturer: Makita SKU: 1591787 Category: Lighting
"Toplink Pin — Category 1, 5 1/2in. Length"
"Toplink Pin — Category 1, 5 1/2in. Length" Manufacturer: Northern Tool and Equipment SKU: 2501936 Category: Ag Equipment + Excavating
Replacement Meat Saw Blade For Item# 168655
Replacement Meat Saw Blade For Item# 168655 Manufacturer: Northern Tool and Equipment SKU: 1686550 Category: Food Processing
5in. x 2in. Fairbanks Rigid Weldless Caster
One-piece construction eliminates stress build-up. Double ball bearings and seal ring keep lubrication in and dirt out. Corrosion-resistant grey epoxy finish. 2 5/8in. to 3in. x 3in. to 3 5/8in. bolt hole spacing. 3/4in. king pin. Top plate size 4in. x 4 1/2in. Caster has a roller bearing. U.S.A. Wheel Size: 5in. x 2in. Mount Height: 6 1/2in. Capacity: 700 Lbs. Bolt Pattern: 2 5/8in. to 3in. x 3in. to 3 5/8in. Top Plate: 4in. x 4 1/2in. Wheel Type: Rigid Polyurethane with Roller Bearings Manufacturer: Fairbanks SKU: 189004 Category: Casters
"When speed is important, use this premium long-life blade. 12in. dia. x .125in.W x 1in.-20mm arborMedium-bond segments are designed for cutting of hard masonry materials, reinforced concrete, general-purpose masonry, brick, block and concrete headersUse this medium-bond blade with low HP walk-behind saws, cutoff saws and table saws" Manufacturer: National Diamond SKU: 1555838 Category: Abrasives
Nesco Food Slicer With Tilt Stand
Food slicer has stainless steel cutting blade to produce perfect cuts. Heavy duty tilt stand is constructed of die cast aluminum housing. Sturdy stand also has unique tilted slicing surface for easy and fast food slicing. Unit disassembles easily and all removable parts except control panel are dishwasher safe. Adjustment knob on back of slicer varies thickness of slices from paper thin to 1in. thick. Cutting Blade: 6 5/8in. Diameter Wattage: 120V, 60 HZ Manufacturer: Northern Tool and Equipment SKU: 168626 Category: Food Processing
Bradley Smoker Versatile Smoker and Dehydrator
"The Bradley Smoker® is capable of cold or hot smoking and slow, low-temperature roasting. Smoke meat for up to 8 hours without supervision. Smoke generator features a unique process that burns a bisquette for 20 minutes, then pushes if off the burner by another bisquette and extinguishes it in a pot of water. The cycle continues as along as the smoker is loaded with bisquettes. Fully insulated powder epoxy steel exterior, aluminum interior. Four 11in. x 15in. nickel-plated cooking racks provide 572 sq. inches of cooking surface. Optimum temperature (320°F max., 140°F min.) controlled by infinite head slide switch. Can also be used to dehydrate fruits, vegetables and meats. 2.6ft. H x 2ft. W x 1.23ft. D overall dimensions. Includes thermometer and cookbook. Bisquettes sold separately." Manufacturer: Bradley Smoker SKU: 168694 Category: Food Processing
