Classic Accessories Boat Cover Support Pole @ NorthernTool supplies, tools & equipment store

24Hour-Store.com Online shopping mall



 

Search For:


Classic Accessories Boat Cover Support Pole

Supports boat covers to prevent pooling of water and debris. Height adjusts from 12in. to 54in.. Rustproof.
Manufacturer: Classic
SKU: 17446
Category: Sporting Goods + Toys


"Prince Tie Rod Cylinder 2500PSI, 5in. Bore, 36in. Stroke, 2in.Shaft Size"

"Tie rod construction, double acting, heavy duty, high strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. These name brand cylinders carry a 3 year warranty. Seal kits are available also. The 2in., 3in., 3 1/2in., 4in. and 4 1/2in. bore cylinders have 1/2in. working ports and 1in. pins. One exception is 909708 which has 1 1/4in. pins. The 5in. bore cylinders have 1 1/4in. pins which are included and 3/4in. working ports. Bore: 5in. Stroke: 36in. Closed Pin Center Distance: 48 1/4in. Shaft: 2in."
Manufacturer: Prince
SKU: 909536
Category: Hydraulics


"AMT Pumps Self-Priming Centrifugal Pedestal Pump — 100 GPM, Model# 2820-IPT-99"

"Pedestal pump features cast iron construction and is ideally suited for both industrial and commercial applications that require high-volume liquid transfer, waste-water drainage and processing. 1-year limited warranty. U.S.A. 1 1/4in. suction NPT1 1/4in. discharge NPT2 HP minimum required @ 3450 RPM100 GPM maximum flowDual volute design reduces radial load on motorBuilt-in check valve ensures consistent self-priming to 20 feet95 feet maximum head (41 PSI) when coupled to motor (not included; customer must supply motor)75 PSI maximum working pressure4000 maximum RPMHandles 3/8in. dia. solidsU.S.A.Model 2820-IPT-99"
Manufacturer: Northern Tool and Equipment
SKU: 109465
Category: Water Pumps


Mossi Full-Face Helmet — Blue — Medium

"Lightweight full-face helmet has tough, impact-resistant thermoplastic shell. DOT approved. For go-karts, ATVs and scooters. Blue, Medium. Comes with single lens shield. Optional dual lens shield Item# 135728 available for cold weather use, sold separately."
Manufacturer: Mossi
SKU: 135709
Category: "Go-Karts, Mini-Bikes + Scooters"


"Pony Pump Self-Priming — 115 Volt, 360 GPH, Model# 50AC110B"

"115V thermally protected motor has stainless steel shaft and replaceable brushes. Draws 1.4 to 1.7 Amps. 6, 3-conductor cord. Pump use should be intermittent. U.S.A. GPH At Total Feet of Head: 1ft. = 360 5ft. = 342 10ft. = 300 20ft. = 270 30ft. = 198 40ft. = 90 Shut Off: 48.3ft. Cast Bronze Pump Body Stainless Steel Cam Garden Hose Hook Up– 3/8in. ID Slip Resistant Rubber Bumpers Carry Handle Use Between 40–160 Degrees F"
Manufacturer: Northern Tool and Equipment
SKU: 109730
Category: Water Pumps


Mossi Full-Face Helmet — Green — Medium

"Lightweight full-face helmet has tough, impact-resistant thermoplastic shell. DOT approved. For go-karts, ATVs and scooters. Green, Medium. Comes with single lens shield. Optional dual lens shield Item# 135728 available for cold weather use, sold separately."
Manufacturer: Mossi
SKU: 135717
Category: "Go-Karts, Mini-Bikes + Scooters"


"Milwaukee Hammer Drill — 950 RPM, 19,000 BPM, 6.2 Amp, Model# 5399"

"Heavy–duty D–Handle hammer drill can handle the toughest drilling of 1/2in. holes in concrete. Powerful 6.2 amp motorTrigger speed control: 0–950 RPM, 0–19,000 BPM, reversingWith Speed Control, the operator can control start up speed and avoid bit walk, making hole positioning more accurateFor drilling in wood with flat boring bits, hole saws, auger bits, and selfeed bitsFor drilling in steel up to 1/2in., 7/8in. soft masonry or 5/8in. hard masonrySelf–stop brush systemIncludes tool, steel carrying case, keyed chuck, side handle and depth gaugeModel 5399U.S.A."
Manufacturer: Milwaukee
SKU: M0152
Category: Power Tools


"Master Lock 1 3/4in. Warded Padlock, Model# 500D"

"Quality padlocks from the worlds largest padlock manufacturer. All Master Lock padlocks are individually tested for strength and durability, and each offers a limited lifetime guarantee. 1 3/4in. (44mm) wide laminated steel body for superior strengthSteel 9/32in. shackle for superior cut resistanceWarded locking mechanism minimizes jamming from dirt and grimeRustproofed for extended wearLimited lifetime warrantyU.S.A.Model 500D"
Manufacturer: Master Lock
SKU: 178546
Category: Safety






© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.