Shoulder Dolly Light Duty Lifting System @ NorthernTool supplies, tools & equipment store




 

Search For:


Shoulder Dolly Light Duty Lifting System

"Make the load (up to 400 lbs.!) feel lighter with the Shoulder Dolly Light Duty system. The system uses webbed harnesses to let you and a partner lift with the larger shoulder and leg muscles, greatly reducing back, hand and arm strain when moving appliances, dressers, cabinets, big-screen TVs and other bulky items. The Shoulder Dolly Light Duty system wont make you stronger, but it will encourage safer lifting techniques. Includes 2 harnesses and one 12ft.L x 5in.W webbing. With the Shoulder Dolly lifting system, you remain upright at all times — no bending over, especially up and down staircasesIncreases maneuverability around tight cornersNothing touches the floor, eliminating scuff marks and scratchesThe weight limit on this system is 400 lbs.Includes 2 harnesses and one 12ft.L x 5in.W webbingDont lift anything heavier than you would normally and/or comfortably lift"
Manufacturer: Northern Tool and Equipment
SKU: 143050
Category: Material Handling


HeatStar 25-Ft. Heat Duct for Item# 173656

"For directing clean, heated air from Enerco 290,000 portable diesel indirect fired heater (Item# 173656) to desired location. 12in. diameter. U.S.A."
Manufacturer: HeatStar
SKU: 173654
Category: Heaters + Stoves


"Makita Pneumatic Framing Air Nailer — 120 PSI, 3 1/2in. Nail Size, Model# AN942"

"Makitas AN942 pneumatic framing nailer is a lightweight (only 8.4 lbs.) yet sturdy framing nailer, firing 2in. to 3 1/2in., 31° paper collated clipped- head nails. The easy-load, rugged aluminum magazine is as simple as inserting the nails and pulling back on the pusher rod. A built-in ceramic air filter system prevents debris from entering the tool, extending tool life and reducing down time. The 9 quick-dial depth adjustment settings give you precise control of nail depth. Nose piece with sure-grip spikes prevents slipping. 65–120 PSI operating pressureErgonomic handle with rubber grip for operator comfort3–mode selector switch for “bump”, “sequential” or “Off” operationModel AN922"
Manufacturer: Makita
SKU: 1591911
Category: Air Tools


"General Pump Pressure Washer Quick Couple Spray Nozzle — 3.5 Size, 25 Degree Spray"

Hardened stainless steel nozzles. Nozzle Size: 3.5Spray Pattern: 25°
Manufacturer: General Pump
SKU: 253016
Category: Pressure Washers


"Milwaukee Diamond Coring Motor — 500 or 1000 RPM, 15 Amp, Model# 4097-20"

"For with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete 215 amp motor 500 or 1000 RPM operating speed Clutch protects gears and motor against overload Handles core bits from 1 1/4in. to 5in. in diameter Built-in water swivel Includes cord with 20 Amp twist-lock plug, adapter to receive standard water hose, water control valve, and wrench Model 4097-20 U.S.A."
Manufacturer: Milwaukee
SKU: M0082
Category: Construction


"Ramsey Sierra Wraparound Mounting Kit for 1999–2003 Ford F–150 4x4, 1999–2002 F–250 Light Duty 4x4 and 1999–2002 Expedition 4x4,

"Fits Ramsey Patriot 9500 (#s 144190, 144192), Patriot 15,000 (#s144191 and 144193), REP 8000e (#14415), REP 5000 (#14410), REP 8000 (#14413), REP 9000 (#14406), QuickMount 5000 (#143160) and QuickMount 8000 (#143506) series winches. Sierra WraparoundSleek “European” design contours to shape of vehicleMounts to vehicle frame without removing bumperWraparound styling offers full grille and headlight protectionInstallation rating: 3*Model 295920*The lower the number(1–5), the easier it is to install"
Manufacturer: Ramsey Winch
SKU: 149109
Category: Winches


"Triangle Fans Belt Driven Industrial Fan — 14,400 CFM, 1/2 HP, 115 Volt"

"Heavy duty, high volume fan designed for use in factories, warehouses, laundries, garages, sports arenas or other locations. One speed 1/2 HP, 115 Volt motor draws 7.9 Amps and blows 14,400 CFM at 305 RPM. Rolls on two 8in. dia. wheels. OSHA listed steel wire guards pop in and out for easy maintenance. Powder coated steel. 44in. W x 45in. H x 20in. D. UL listed. Truck Ship. U.S.A."
Manufacturer: Triangle Fans
SKU: 250686
Category: Shop Supplies


Northern Industrial Tools Dead Blow Hammer — 4lb.

Soft face dead blow hammer.
Manufacturer: Northern Industrial Tools
SKU: 152894
Category: Hand Tools






24Hour-Store.com co. LLC. USA inc. All rights reserved.
February-20-2018 With any using link to 24Hour-Store.com strongly required.