Northern Industrial Tools Dent Puller @ NorthernTool supplies, tools & equipment store

24Hour-Store.com Online shopping mall



 

Search For:


Northern Industrial Tools Dent Puller

Pulls out small dents by suction power alone! Many other holding and pulling applications. Super-tough rubber cup and one-piece cast aluminum grip. Diameter of cup: 5in.
Manufacturer: Northern Industrial Tools
SKU: 14476
Category: Automotive


"Ingersoll-Rand Air Impact Wrench — 1/2in. Drive Thunder Gun, 5.4 CFM, 10,000 RPM, 625lb. Torque, Model# 232TGSL"

"Hear and feel the power of the Thunder Gun. Looks and sounds just like the original tool used by 80% of NASCAR pit crews! Features 10,000 RPMs, 625 ft.-lbs. max torque in reverse, and a black powder-coated handle and housing. Put this tool to work at the track or in your garage, and at a much more affordable cost than the original. Model number 154156-232tgsl1200 blows per minuteForward torque range: 40–400 ft. lb. Max5/8 in. standard bolt capacity5.4 CFM average air consumption21 CFM @ load1/4 in. air inlet, 3/8 in. minimum hose"
Manufacturer: Ingersoll-Rand
SKU: 154156
Category: Air Tools


CAT Mini Excavator Die-Cast Collectible — 1:32 Scale

"1:32 scale lifelike mini-hydraulic excavator features rolling tracks, doser blade and boom that raises and lowers and 360° swivelling main body. Comes with three interchangeable work tools: ditch cleaning bucket, digging bucket and hammer. Free Tee Shirt Offer! Receive one free CAT Logo Tee Shirt with each CAT Collectible item purchased. Free CAT Tee Shirts, size XL, will not be shown in your shopping cart, but will be added to your order as it is processed. Offer valid while supply lasts."
Manufacturer: CAT
SKU: 199325
Category: Die-Cast Collectibles


"Milwaukee Work Light — 18 Volt, Model# 49-24-0160"

Light only; BATTERY NOT INCLUDEDAccepts 18V power plus batteriesRugged construction for industrial useXeon bulb produces extremely bright uniform lightModel 49-24-0160U.S.A.
Manufacturer: Milwaukee
SKU: M0404
Category: Lighting


Comet Industries Go-Kart Clutch — V-Belt

Heavy-duty clutch is designed for go-karts. Centrifugal clutch to engage a V-belt. U.S.A. Hoffco-Comet V-Belt Clutch3/4in. bore7 HP rating
Manufacturer: Comet Industries
SKU: 1375
Category: "Go-Karts, Mini-Bikes + Scooters"


"DMK Heavy-Duty Halogen Worklight — 4in. Round, 12 Volt, 55 Watt Bulb"

"This tough worklight delivers dependable long life performance. It is designed for agricultural, construction, forestry and mining equipment, forklifts, utility vehicles and general purpose lighting. Delivers even illumination of work area, resists vibration and is sealed for water and dust resistance. 4in. round12V H3 halogen 55 Watt bulbTough fiberglass-reinforced housing resists chemicalsSealed for water and dust resistanceGlass lens resists heat cracking and scratchesSymmetrical lens provides even flood pattern to illuminate work area with 90° adjustment rangeMounts upright or hanging with included bracket and hardwareIncludes 6in.–8in. lead wire for hard wiringUSA"
Manufacturer: Northern Tool and Equipment
SKU: 163486
Category: Safety


"Carter Brothers Go-Kart - 150cc, 2-Seat, Dark Green, Model# FX 150 2R"

"Take a friend off-road for some thrills with this powerful 150cc electric start kart that can reach speeds up to 38 MPH. Full suspension handles uneven terrain smoothly. 150cc, 4-stroke engine (12.5 HP @ 7500 RPM)Full suspension go-kartElectri"
Manufacturer: Carter Brothers
SKU: 131305
Category: "Go-Karts, Mini-Bikes + Scooters"


Mini-Bike Throttle Cycle Control

7/8in. ID. Super soft grip less cable. (Dummy grip included). With adapter.
Manufacturer: Northern Tool and Equipment
SKU: 1380
Category: "Go-Karts, Mini-Bikes + Scooters"






© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.