Hitchmaster Pintle Receiver Adapter @ NorthernTool supplies, tools & equipment store

24Hour-Store.com Online shopping mall



 

Search For:


Hitchmaster Pintle Receiver Adapter

Designed to adapt a trailer hitch receiver tube to multi-height pintle hook applications. High and low positioning. Continuous welded support bracket. Epoxy coated to resist weather. 8in.L x 2in. square shank; 5in.W x 7in.H plate. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 12890
Category: Towing


"Chicago Pneumatic Air Ratchet Wrench — 1/4in. Drive, 3 CFM, 220 RPM"

"5/15 ft.-lb. working torque30 ft.-lb. maximum torqueCompact and lightweightApplications: Under-dashboard work, small engine repair, small fasteners, etc.3 CFM average air consumption1/4in. air inletEasy speed control throughout range with maximum rundown speed of 220 RPM7 3/4in. long1 1/8 lb.Designed for greater reach in confined areasModel CP-824"
Manufacturer: Chicago Pneumatic
SKU: 110457
Category: Air Tools


"DEWALT Pilot Point Gold Ferrous Oxide Drill Bit — 5/32In., Model# DW1910"

"Pilot Point tip starts on contact, drills clean, accurate holes and reduces burrs that cause lock-up on breakthrough. Tapered web provides greater durability to reduce breakage. No-spin shank means no bit spinning in the chuck. Size markings located above the shank to prevent wearing away. For drilling wood or metal. 5/32in. U.S.A."
Manufacturer: DEWALT
SKU: 399895
Category: Power Tools


"Little Giant Manual Submersible Utility Sump Pump — 115 Volt, 1920 GPH, 1/4 HP, Model# 577113"

"115 Volt, oil–filled, shaded pole motor is thermally protected and pumps up to 32 GPM (1920 GPH) @ 5ft. Durable, cast iron housing with nylon, glass–filled impeller. 1 1/2in. FNPT discharge with 3/16in. solids handling. Minimum basin size: 18in. diameter x 24in. deep. Includes 10-ft. power cord. UL and CSA listed."
Manufacturer: Little Giant
SKU: 108802
Category: Water Pumps


Dino 18-Pc. Navigator Pick Set

"15 picks and 3 different function tension tools get you in when youre locked out! Uniquely designed picks include all styles of rake, hook, riffle, ball, diamond and diamond-hook, as well as a broken-key extractor, special-design feeler, standard tension tool and 2 special-design convenient tension tools. Blades are hardened spring steel with polished chrome finish; handle is reinforced plastic. All picks are stored in a foldable case that can be worn on a belt.NOTE: This product not for sale to any minor. Buyer is responsible to check state/local codes. Product not intended for illegal use."
Manufacturer: Dino
SKU: 1994751
Category: Hand Tools


"2-Pk. Deck Bench Brackets (Black), Model# 15410"

Add extra seating area on your deck with Deck Bench Brackets and your own lumber (2 x 4s or 2 x 6s). Build a short bench on one side or use as a railing with integrated seating around the entire perimeter. Its easy — very little measurin
Manufacturer: 2x4 Basics
SKU: 252207
Category: Outdoors


"Makita Power Cutter — 12in, Model# DPC6400"

"Gas–powered cutter has a 5–stage air filtration system, plus a 2–mass dampening system that significantly reduces vibration. Compression–release valve reduces start–up force by 70%, and air–inlet ports reduce noise by 40&"
Manufacturer: Makita
SKU: 999600
Category: Construction


4in. x 1 1/2in. Fairbanks Rigid Zinc-Plated Caster

All steel exclusive Lockweld construction. Zinc galvanized finish. Polyolefin Wheels. Wheel Size: 4in. x 1 1/2in. Mount Height: 5in. Capacity: 300 Lbs. Wheel Type: Rigid
Manufacturer: Fairbanks
SKU: 189112
Category: Casters






© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.