ALC Abrasive Blasting Cabinet 48in. Floor Unit @ NorthernTool supplies, tools & equipment store

24Hour-Store.com Online shopping mall



 

Search For:


ALC Abrasive Blasting Cabinet 48in. Floor Unit

"Easy set up and assembly takes only a few hours. Ships ready to assemble, with no holes to drill and no rivets. Simply caulk, bolt together and paint. Includes 24in. long gloves, high quality ALC Blast Gun with 1 tip. Truck Ship. U.S.A."
Manufacturer: ALC
SKU: 155633
Category: Sandblasters


"General Pump Pressure Washer Quick Couple Spray Nozzle — 3.5 Size, 15 Degree Spray"

Hardened stainless steel nozzles. Nozzle Size: 3.5 Spray Pattern: 15°
Manufacturer: General Pump
SKU: 25202
Category: Pressure Washers


Zee Line Air Pneumatic Grease Pump — 60:1 Pressure

"Stationary pneumatic 60:1 chassis lube system pumps grease from a 120–lb. drum and has a free–flow rate of 66 oz. per minute. Recommended for grease up to NLGI #2. Complete system includes control handle, Z–swivel, male and female quick couplers, needle valve, air filter, drum cover, follower plate, 6ft.L x 1/4in. high–pressure hose and 48in.L x 1/4in. air hose. Max. 10,000 PSI. Pump tube measures 29.13in.L x 1.18in. dia. Pump head is 13in.L x 3.15in. dia. Suction tube constructed with no seals to eliminate excessive wear. 5–year limited warranty."
Manufacturer: Zee Line
SKU: 109023
Category: Fuel Transfer + Lubrication


"Northern Industrial Tools Electric Drill — 3/8in. Chuck Size, 2500 RPM, 3"

"400 Watt, variable speed, reversible 2500 RPM at no load 3/8in. max. drilling dia.; 3/8in. keyed chuck. No Load: 1.5 Amp Running Current: 3.8 Amp"
Manufacturer: Northern Tool and Equipment
SKU: 143391
Category: Power Tools


""A" Frame 2-Sided Sheet Truck — 2,000 lbs."

Large capacity truck has a 12-ga. steel base with a 1in.H retaining lip on each side. Frame extends 48in. above deck; uprights 12in. apart at base. Moves on four 6in. dia. x 2in.W polyolefin roller bearing wheels. 24in. x 48in. Truck Ship. U.S.A.
Manufacturer: Northern Tool and Equipment
SKU: 143981
Category: Material Handling


"Briggs & Stratton Intek I/C Horizontal Engine — 8 HP, 1in. x 2 29/32in. Shaft, Model# 202437-0041-E1"

"Model 202437-0041E18 HP Horizontal shaft; dimensions: 1in. x 2 29/32in., end tapped 38in. - 24, with 1/4in. keywayApproximate mounting base dimensions 7.69in. x 3.37in.Flange mount bolt circle diameter 3 5/8in, 5in., 6.5in.Overall engine dimensions 12.84in.D x 16in.W x 16in.HPTO and DU Magneto side ball bearingsDura-Bore® cast-iron cylinder sleeveMaintenance-free Magnetron® electronic ignition3750 max. RPMsDual-Clean® air filter12V electric start U.S.A. 2-year consumer warranty"
Manufacturer: Briggs & Stratton
SKU: 60883
Category: Engines


"Contico Steel Storage Tank — 55 Gallon Capacity, Rectangular"

"Powder coated white 14-gauge steel tanks hold diesel, fertilizer, water and more. Intended to be used as transfer tanks. Not for commercial use. Tanks are not DOT approved. Pre-vent fill cap. Fit any truck. U.S.A. Capacity: 55 GallonDimensions: 30in.L x 23in.W x 19in.H"
Manufacturer: Contico
SKU: 334293
Category: Grounds Maintenance


Geneva Underbody Truck Box Drawer Divider — 36in.

"36in. underbody box divider set-4 each (2 vertical, 2 horizontal)"
Manufacturer: Geneva
SKU: 34805
Category: Automotive






© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.