"Milwaukee D-Handle Chop Saw 14 in., Model# 6180-20" @ NorthernTool supplies, tools & equipment store
"Milwaukee D-Handle Chop Saw 14 in., Model# 6180-20"
"Only tool-free abrasive cutoff machine on the marketNo tools required for adjusting the back fence or changing abrasive wheelsPowerful 5.4 HP, 15 Amp motor3900 RPM no6load speedHeavy-duty cast aluminum base with a 1/4 in. reinforcing plate3/8 in. thick quick-release adjustable cast iron vise3-position back fenceD handle provides optimum comfort whether the tool is on the ground or on a bench5-year limited warrantyModel 6180-20" Manufacturer: Milwaukee SKU: M0510 Category: Power Tools
Milwaukee Diamond Coring Small Base Stand Model# 4125
Designed for heavy-duty hole drilling Larger column and base assembly ensure strength and durability The small base ideal in confined drilling areas Large wheels for ease of movement Right or left hand operation Capable of 45 degree angle drilling Bolts to wall or floor Includes small base stand only Model 4125 U.S.A. Manufacturer: Milwaukee SKU: M0090 Category: Power Tools
"Steering Wheel Spinner, Model# 12"
"Heavy duty spinner has sealed ball bearings for smooth, effortless turns. Stays rattle-free! Weatherproof post does not conduct extreme heat or cold. Easy-mount base." Manufacturer: Northern Tool and Equipment SKU: 1698 Category: Grounds Maintenance
"Ingersoll-Rand Air Random Orbital Sander 5in. Dia, 8 CFM, 12,000 RPM, Model# 4151-5"
"Powerful .2 HP 6in. random orbital sander. U.S.A. 12,000 RPM free speedVacuum-ready, 360° swivel rear exhaustOil-free operationLow vibration5in pad8 CFM average air consumption15.5 CFM @ load1/4in inlet, 5/16in. minimum hose sizeModel IR4151-5For use with Jet Vac Conversion Kit, Item# 158341" Manufacturer: Ingersoll-Rand SKU: 158322 Category: Air Tools
Milwaukee Adjustable Position Electromagnetic Drill Press Base and Motor Model# 4206-1
"Includes motor and adjustable position, variable speed base For use on any flat ferrous material, 1/2in. and thicker 3/4in., 12.5 Amp, 350 RPM drill motor Drill press is 120 Volt AC; 12.5 amp max. rating Solid state electronic switching 11in. drill travel Motor/magnet lockout prevents de-mag during operation Feedback speed control Computer-controlled reverse Full wave holding power Model 4206-1 U.S.A." Manufacturer: Milwaukee SKU: M0096 Category: Power Tools
"Clarke Hot Shot Spool Gun Welder 130 Amp, 120 Volt, Model# WE6441"
"This portable and lightweight welder offers maximum mobility for use on ladders, under vehicles or on equipment. High-tech spool gun design allows precise wire speed control, even when 20 feet away from unit. Easily changes from fluxcore to gas shield" Manufacturer: Clarke SKU: 16472189 Category: Welding
"(Electricial) Tape 60ft. Length, 10 Roll Pack"
Black 3/4in. general-purpose vinyl electrical tape protects and insulates electrical connections. Excellent adhesion and elongation properties. Ideal for extreme weather conditions. Flame retardant and UL listed. Each roll 60 ft. long. Manufacturer: Northern Tool and Equipment SKU: 18061 Category: Shop Supplies
300-Lb. Capacity 10in. Swivel Pneumatic Caster
These rugged pneumatic casters haul heavy loads smoothly and quickly! Air-filled 4.10/3.50-4 tire is 10in. high. 5/8in. bore. Wheel Size: 10in. Mount Height: 12in. Bolt Pattern: 2 3/4in. x 3 1/2in. Top Plate: 4in. x 4 1/2in. Wheel Type: Swivel Ball bearings with grease zerks Maximum speed: 5 MPH Manufacturer: Northern Tool and Equipment SKU: 11000 Category: Casters