30-pc. Glove-box Screwdriver Bit Set @ JC Whitney Auto Parts store
30-pc. Glove-box Screwdriver Bit Set
30-PIECE GLOVE-BOX SCREWDRIVER BIT SET Virtually every bit you'll ever need! The equivalent of a chest of screwdrivers in a case small enough to fit easily in your glove box! Just look at what you get for this price! Includes: pro-quality driver with chrome-plated shaft and contoured, sure-grip transparent PVC handle; magnetic bit holder; 5 flat bits (1/8" through 9/32"); 4 Phillips bits (#0 through #3); 6 star drive bits (SD-10 through 40); 4 square drive bits (S-0 through 3); 5 hex bits (5/64" through 9/64"); 2 Pozidriv bits (PZ1, PZ2); socket adapter (1/4" hex x 1/4" drive); socket/bit adapter (1/4" drive x 1/4" hex); organizer/storage case. All bits are 1" long and are precision machined of sandblasted, heated-treated chrome-vanadium steel. Bits snap securely into the 9" x 2-1/4" x 1-3/4" organizer case. Applications: All Makes All Models SKU: 47ZX8676U
"Big Guys" Double-tube Bumpers
"THE BIG GUYS" DOUBLE-TUBE BUMPERS Monstrous 3-1/2" diameter tubing for distinctive styling and the most impressive look around! Look great coming and going while providing dependable protection to your Wrangler! Smaller bumpers simply can't compare to the difference these "big guys" will make on your Jeep�! Modular (not welded together) design simplifies installation and makes it easier to replace a damaged bumper. Bumpers mount to factory holes for easy bolt-on installation. No drilling required. Front bumpers can be used with or without overrider bar (sold separately). Detailed instructions and installation hardware included. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1997-2003 Jeep Wrangler TJ,1997-2003 Jeep Wrangler TJ,1997-2003 Jeep Wrangler TJ,1997-2003 Jeep Wrangler TJ SKU: 47ZX7191NF
4-Pole Flat Connector
FLAT CONNECTORS A range of choices: 2-, 3- and 4-pole flat connector set, trailer light connector and mounting kit (4- or 6-pole), polarized connector set (4- or 6-pole) and 7-pole connector set. Applications: All Makes All Models Manufacturer: Nu-Cor SKU: 12ZX2191A
3-in-1 Alarm System
VALIANT 3-IN-1 ALARM SYSTEM, KEYLESS ENTRY, REMOTE STARTER Top-quality alarm plus remote starter and keyless entry built into one easy-to-install module! Approximately 1,000-foot range! For fuel-injected vehicles with automatic transmission Remote Alarm: Valet switch temporarily overrides system. 4-button remote transmitters means a separate button for specific features to simplify operation. Dual-stage shock sensor delivers a warning sound when a light tap is detected and triggers the alarm if warning is unheeded. Current sensor detects when dome, courtesy, hood or trunk light goes on and uses existing door, hood or trunk switches and triggers alarm during forced entry. Instant panic protection located on remote. Instant door trigger protection�alarm sounds if any door is opened while alarm is active. Parking light confirmation�parking lights will flash continuously if alarm is triggered. Lights will flash once when alarm is activated and twice when alarm is de-activated. Keyless entry uses transmitter to lock/unlock existing power door locks. Remote trunk release�remote transmitter opens trunk with the push of a button. Dome light supervision�dome light comes on for safety when alarm is disarmed. 6-tone 126 dB siren. Plug-in LED acts as a visual deterrent. Remote Starter: Starts engine and vehicle's heater, defroster or air conditioner with a push of a button on the transmitter. Engine runs for approximately 15 minutes, then automatically shuts off. Vehicle cannot be driven until key is put in ignition and turned "on," brake is pressed and transmission shifted into gear. Built-in on-board relays for starter, ignition 1 and 2, heater, defroster and air conditioner. Pit-stop feature means vehicle can be left running without keys for brief stops. Remote Keyless Entry: For fuel-injected vehicles with automatic transmission. Includes two 4-button transmitters. General Motors and Ford vehicles with original-equipment security systems require adapter kits (sold separately). See owner's manual to verify if vehicle has an original-equipment security system and what type it is. Adapter Kit for GM vehicles with VATS, Passkey I and II and Passlock original-equipment security systems. Adapter Kit for Ford Motor Co. vehicles with PATS, GM vehicles with Passlock III and all other vehicles with Immobilizer original-equipment security system. 30-amp relay for optional power trunk/hatch release, starter kill and dome light activation sold separately. Applications: All Makes All Models SKU: 48ZX6249A
"Big Guys" Double-tube Bumpers
"THE BIG GUYS" DOUBLE-TUBE BUMPERS Monstrous 3-1/2" diameter tubing for distinctive styling and the most impressive look around! Look great coming and going while providing dependable protection to your Wrangler! Smaller bumpers simply can't compare to the difference these "big guys" will make on your Jeep�! Modular (not welded together) design simplifies installation and makes it easier to replace a damaged bumper. Bumpers mount to factory holes for easy bolt-on installation. No drilling required. Front bumpers can be used with or without overrider bar (sold separately). Detailed instructions and installation hardware included. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1986-1996 Jeep Wrangler YJ SKU: 47ZX7193AF
