Stick-On Weatherstrip @ JC Whitney Auto Parts store
Stick-On Weatherstrip
STICK-ON WEATHER STRIP Samples available Choose from a variety of sizes Great for car trunks as well as auto, home and garage doors and windows High-quality SBR blend neoprene black foam rubber. Seals out cold, moisture and road noise�acts as a cushion to end rattles. Resists breakdown if exposed to gasoline and other automotive chemicals. Closed-cell construction resists moisture retention and ensures a good seal. Pressure-sensitive, self-adhesive backing for easy installation. To receive a weather strip sample, call 312.431.6103. Applications: All Makes All Models SKU: 12ZX7120N
ShurGrip Super "Z" LT Design Cable Tire Chains
SUPER "Z" LT DESIGN CABLE TIRE CHAINS Specially designed for light trucks�chains feature extra-heavy-duty crossmembers and larger rollers for extended service under loads and during aggressive driving Refer to TIRE SIZE CODE CHART (see below) for proper ordering Meet the limited clearance requirements of vehicles labeled SAE Class "S" in the owner's manual Safety designed for easier starts, faster stops and better traction than any other chain! Patented "Z" design provides your vehicle with continuous, aggressive traction under all ice and snow conditions. Part of the chain is in contact with the road at all times for superior take-hold traction�no gaps as with conventional chains. Fits beautifully and adjusts automatically. Cable chain is engineered for maximum wear, traction and riding comfort. It rides quieter and smoother than link chains. Ultra-strong aircraft cable is covered with carbon steel rollers. Sharp rotating roller edges bite deep into snow, ice and mud yet won't wear down sidewalls like link chains. Side cable/roller cable connector lies flat against tire�nothing to stick out and get caught on fender. "Z" design chains install easily even on vehicles with anti-lock brakes or all-wheel drive. Rubber tightener takes up all slack in chains�no adjustments�ever! A durable plastic storage case and plastic gloves included. For FWD and RWD vehicles with radial and conventional tires. Sold in pairs. Applications: All Makes All Models, All Makes All Models SKU: 54ZX9177B
Tornado Performance Booster
PERFORMANCE BOOSTER Designed to burn fuel cleaner, faster and more completely for greater power and fuel economy Increase gas mileage 7% to 24%, gain a 4- to 13-HP increase! Stainless steel booster installs easily inside the air intake hose of electronically fuel-injected vehicles Creates a swirling motion forcing air around corners and bends and through intakes Since air is the main component in the combustion process, this mini whirlwind results in the best fuel atomization possible. Tests prove it! The Tornado� increases gas mileage from 7% to 24% (figures confirmed by road tests performed by an emission lab licensed by EPA/CARB). Dyno testing shows a big boost in horsepower�4-HP to 13-HP gain. Maintenance free�no moving parts to wear out. Manufacturer's lifetime warranty. To order proper size For Carburetor/EFI Type: (1) remove air inlet hose located between throttle body and air filter box; (2) measure inside diameter (ID) of hose; match measurement with corresponding ID given. For Carburetor/TBI Type: (1) lift top off to expose the air filter element; (2) line up a straight edge along top of air cleaner element at center and measure height at point "A", 3-1/2" from center stud. "A" is distance from air cleaner base to bottom of straight edge. NOTE: Most '87-97 Ford cars, trucks and vans with 4.9L, 5.0L, 5.8L and 7.5L engines have 2 air intake hoses; therefore, 2 Tornado� boosters are required for these applications only. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models SKU: 81ZX5899B
Shelf-It Overhead Storage
OVERHEAD STORAGE SHELF Great low price for so much extra storage space! Ends clutter�organizes your interior Provides far more storage space than your glove compartment�plenty of room for your cell phone, cassettes, garage door opener, etc. Protects heat-sensitive items from the sun. Stored gear is out of the way and out of sight yet within easy reach. Approximately 5-1/2" front to back with an angled 1" lip to prevent stored items from sliding off. Heavy-duty aluminum frame won't warp or bend. Velvet-like finish looks like headliner material. Finish is water, flame, scratch and mar resistant. Easy 4-step installation without drilling: (1) remove sun visors; (2) install brackets in visor holes; (3) mount shelf; (4) reattach visors. Will not fit trucks with double visors (2 visors per side). Shelf extends across the passenger compartment and a few inches below the roof line and may restrict vision through top part of the windshield. This may be slightly more noticeable for drivers over 6'3" tall driving a smaller truck. For additional technical information, call (800) 743-5348; sorry, orders cannot be placed on this number. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-2000 Ford Van - Full Size,1998-2000 Ford Van - Full Size SKU: 07ZX4962PF
Thunder Muff Headers
EMISSIONS-LEGAL HEADER KIT Flocote� internal ceramic finish increases exhaust flow for more power and better overall performance Triple-thick exterior ceramic coating fights rust and heat so your street machine's header lasts 10 times longer�or more! Exterior and interior ceramic coating. Custom fit and street legal. Bifurcated 4-2-1 tubing design for the most torque and horsepower (except where noted). CNC billet connector flanges (the best!) with O-ring seals ensure no warping, no leaks and no power loss. Ultra-smooth outer coating. Mandrel-bent thick-wall 16-gauge tubing retains heat for more power. Exclusive heli-arc nickel-bronze welds enhance looks, prevent leaks and resist cracking due to vibration. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1988-1989 Honda Prelude Si SKU: 94ZX3938NF
