Trim Rings For Standard And Rally-Style Steel Whee @ JC Whitney Auto Parts store

 24Hour-Store.com Online shopping mall



 

Search For:


Trim Rings For Standard And Rally-Style Steel Whee

TRIM RINGS FOR STANDARD & RALLY-STYLE STEEL WHEELS Original-style retention system Choose from chrome-plated ABS plastic, chrome-plated stainless steel, chrome-plated steel & stainless steel Grip-tight fasteners snap into existing wheels. For all wheels that accept full wheel covers. Please Note: Cannot be used with full wheel covers. Set of 4. Applications: All Makes All Models
SKU: 81ZX5656W

Smittybilt SeatWare Vests

SEATWARE VESTS Designed to fit any Jeep� Wrangler seat Stretch to fit easily and smoothly over any original bucket or factory replacement seat The ultimate in protection and style! Vests cover both front and back of seat. Sold in pairs. Applications:1968-1983 Jeep CJ5,1976-1986 Jeep CJ7,1981-1985 Jeep Scrambler,1987-2003 Jeep Wrangler
SKU: 49ZX8683Y

Sunpro Gaugecage Universal Gauge Pods

GAUGECAGE� UNIVERSAL GAUGE POD Adds a performance look to your interior Mounts to pillar post and holds gauge(s) at perfect viewing angle Lets you add extra gauges in your car without altering the dash Accepts 2" or 2-1/15" gauges (not included). Pod attaches with screws or double-sided tape. Paintable black plastic housing may require some trimming or heat-forming over the pillar post (use your hair drier) to achieve the perfect fit. Applications: All Makes All Models
SKU: 48ZX7450U

True Billet Under-hood Styling Accessories

BILLET ALUMINUM UNDER-HOOD STYLING ACCESSORY KIT Aircraft-grade billet aluminum, individually crafted and hand polished to a mirror finish The ultimate custom sparkle for your engine compartment! Each accessory is designed for its specific truck and fits without modifications or alterations Only True Billet? builds custom-fit dress-up parts that you can install with just the turn of a screw! You get a custom look that doesn't require custom fitting. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. KIT CONTENTS 7-piece Kit. Includes brake reservoir cover and 6 caps (brake fluid, power steering, overflow, washer fluid, engine oil, radiator). 11-piece Kit. Includes full transmission dipstick, 8 caps (overflow, engine oil, oil dipstick, 2 air conditioner, washer fluid, power steering, brake fluid), brake reservoir cover, battery cover. 13-piece Kit. Includes full transmission dipstick, 8 caps (overflow, engine oil, oil dipstick, 2 air conditioner, washer fluid, power steering, brake fluid), brake reservoir cover, battery cover, extra battery cover, fuel test port. Complete 14-piece Kit. Includes full transmission dipstick, 8 caps (overflow, engine oil, oil dipstick, 2 air conditioner, washer fluid, power steering, brake fluid), brake reservoir cover, battery cover, 2 fender supports, fuse cover. Complete 15-piece Kit. Includes full transmission dipstick, 8 caps (overflow, engine oil, oil dipstick, 2 air conditioner, washer fluid, power steering, brake fluid), brake reservoir cover, battery cover, fender support, fuse cover, extra battery cover, fuel test port. Applications:2001-2002 GMC Sierra 8.1L 3/4-ton with Hydraulic Brakes,2001-2002 Chevrolet Silverado 8.1L 3/4-ton with Hydraulic Brakes
SKU: 48ZX8937RF

Triple-vented Street Helmets with Face Shield

PRIX TRIPLE-VENTED STREET HELMETS WITH FACE SHIELD, AIR DEFLECTOR/DEFUSER AND REMOVABLE LINER M2000 Snell certified! Refer to HELMET SIZING CHART A (see below) Extra-tough one-piece design includes padded and lined integral chin bar Flip-up ratcheting face shield is made of clear optical-quality, injection-molded Lexan? and is treated to resist scratches. Center tab allows one-finger adjustments. Multiposition ratchet shield assembly is concealed under screw-on plastic side pods (painted to match helmet). Fingertip-adjustable air vents are located on the chin bar and forehead. All vents are black, except white on white helmets. Color-matched air deflector/defuser scoop covers exhaust vent on top of helmet and maximizes airflow by pulling air from open chin-bar and forehead vents up and out of the helmet. Deflector/defuser has 3 front openings and 2 rear openings. Helmet liner is removable for washing or replacement. Stronger and lighter than fiberglass! Outer shell and chin bar are made of revolutionary Tenntex?, a unique alloy of polycarbonate and other materials that's stronger and dissipates impact energy better than fiberglass or conventional polycarbonate. Aerodynamic Tenntex? outer shell is balanced to help prevent wobble at higher speeds. Shell is sanded smooth, then painted with quality paint. To achieve the deep luster of the metallics, only ultra-fine flakes are used. High-gloss clear polyurethane protects the painted finish?also allows effortless soap-and-water cleanups. PRIX logo is applied over the protective clear coating and may be removed if desired. Contoured-to-fit one-piece polystyrene inner shell helps absorb shocks not dissipated by the outer shell. Comfort features include: perforated black brushed microfiber nylon lining with bonded-on foam backing is sweat resistant and moisture absorbent; extra-thick cheek padding; cushioned chin strap to minimize chafing; cushioned neck roll with black vinyl lower panel to block cold, rain and wind; extra-large window ensures unobstructed viewing. Black nylon chin strap with chromed steel "D" rings, black rubber base and window trim. Meet or exceed DOT specifications. Soft, padded nylon bag with drawstring closure is included to protect stored helmet. Replacement face shield, side pods and helmet bag sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Applications: All Makes All Models
SKU: 01ZX3801X



© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.