OIL FILTERS Designed to trap damaging particles without restricting oil flow! For Harley-Davidson�, Honda, Kawasaki, Suzuki and Yamaha Motorcycles Spin-On Style 1-pc. 16-gauge steel tank with rolled and crimped edges for maximum strength and leak prevention. Internal pressure relief valve assures engine gets the oil it needs under all conditions. For the Harley-Davidson� cycles listed only. Applications:1984-1986 Honda VF Models 500C,1984-1987 Honda VF Models 700C; F; S,1982-1983 Honda VF Models 750C,1988 Honda VF Models 750C Magna,1982-1984 Honda VF Models 750F; S,1985-1986 Honda VF Models 1000R,1983-1986 Honda VF Models 1100C,1986-1987 Honda VFR Models 700F,1986 Honda VFR Models 750F SKU: 06ZX2408X
Tripp Lite Powerverter Plus Power Inverters
POWERVERTER� PLUS HIGH SURGE Industrial strength DC-to-AC inverters for vehicular mounting Initially maintain up to 200% of rated output to efficiently start up heavier motors Highly-efficient operation conserves battery power and prolongs run times Frequency-controlled for operating stability Diagnostic LEDs indicate load level (high, medium, low) and battery charge (high, medium, low) DC fusing protects inverter against overload Put some high power AC wall sockets in your vehicle! Frequency control locks AC output at 60 Hz for operating stability of motor loads. Set of high-current DC input terminals for simple, permanent installation included. Highly-reliable large transformer design specializes in powering motors and other inductive loads with high-current startup needs. Not sure which Tripp Lite Inverter is right for you? Click here for our Inverter Sizing Guide. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models SKU: 47ZX0758Y
Turbo Nets
TURBO NET� TAILGATE NET/CARGO FENCE Works like a conventional tailgate but without the air drag and gas waste Unlike ordinary bars, smaller gear can't slip under net Mounts anywhere inside bed to prevent a less-than-full load from sliding around Tear-resistant vinyl-coated polyester. Adjustable steel rods at top and bottom prevent net from sagging and are strong enough to safely hold big, bulky loads. Simply remove the locking pin to lower the net for easy loading. Installs in any location�drilling required. Can be used with or without original tailgate. Applications: All Makes All Models SKU: 07ZX5251X
Universal Cycle Drive Chains
UNIVERSAL AND HEAVY-DUTY CYCLE DRIVE CHAINS Pre-stretched to minimize initial stretch Choose universal or heavy-duty (refer to chart at left for how to measure replacement chain) Solid roller-drive chains with strong-heat treated, shot-peened components Include the master link and require breaking for a custom fit (chain breaker not included). Order by chain size (usually found on master link) and number of links. How To Determine Number of Chain Links: There's an easy way to find out using any of the 3 methods below. For greatest accuracy, it's best to start counting at the master connecting link. Marking that link will prevent double counting. Remember, the number of links will always be an even number. Count all rollers. The number of rollers equals number of links. Count all pins on one side of chain. The number of pins equals number of links. Starting with the master connecting link (counted as "1"), count all outer side plates on one side of chain. Double that number equals the number of links (e.g., 48 outer side plates equals 96 chain links). Applications: All Makes All Models SKU: 06ZX6115U
Side Mirrors for CJ
SIDE MIRRORS For '55-96 Jeep? CJs and Wranglers Replace originals perfectly All mounting hardware included. Sold in pairs. Applications:1987-1996 Jeep Wrangler,1955-1986 Jeep CJ7,1955-1986 Jeep CJ6,1955-1986 Jeep CJ5,1955-1986 Jeep CJ3B,1955-1986 Jeep CJ3A,1955-1986 Jeep CJ2A,1955-1986 Jeep Scrambler SKU: 73ZX2620N
