Quadrablade Lifetime Wiper Blades @ JC Whitney Auto Parts store
Quadrablade Lifetime Wiper Blades
QUADRABLADE� LIFETIME WIPER BLADE 4 wiping edges instead of one! Guaranteed to never wear out, rot, crack, tear, smear, streak, rust, squeak, chatter, freeze or stick For American and imported cars and light trucks Limited lifetime warranty Best you will ever buy�you'll never have to buy another blade for your car or truck. Never struggle to see through torrential downpours or driving sleet storms again. 4 wiping edges to clear away the heaviest rain, snow, ice and mud in a single pass. Enjoy crystal-clear visibility�even when driving conditions are at their worst. The sweeping, clearing and cleaning edges remove most water, dirt, bugs, etc. from your windshield. The fourth edge (the squeegee) wipes away any remaining moisture or debris and leaves a clean, streak-free windshield. No streaks�wiper has 4 staggered edges, each removing layer after layer of water and debris until nothing is left to streak. A conventional wiper has only one edge that can lift slightly as it passes over debris to cause smears. No chattering�pressure is placed on 4 edges (not just one), so the blade can't set or chatter�ever. When not in use, an ordinary single-blade rubber wiper (even a new one) can set into a permanent curve against your windshield; it will wipe effectively in one direction, but chatter when moving in the opposite direction. No freezing or sticking�wiper is made of nonporous synthetic, so it will never freeze, stick or tear. A conventional wiper is made of porous rubber which can trap water and freeze to your windshield. Rustproof aerodynamic stainless steel frame and Lexan� spline hold wiper firmly against windshield�no lift even in high winds or at high speeds. Blades are made of a virtually indestructible space-age polymer. All necessary mounting adapters and instructions included. Choice of 13 sizes for driver or passenger side or rear. Not for use on 1993-1996 Chevrolet Camaro and Pontiac Firebird or 1991-1993 Toyota Previa. Applications: All Makes All Models SKU: 81ZX8253R
Pitman Arm Pullers
PITMAN ARM PULLERS Alloy steel construction Available with or without adjustable jaws Make quick work of even the toughest pulling jobs! Applications: All Makes All Models SKU: 13ZX2398A
Reversible Locking Storage Box
REVERSIBLE LOCKING STORAGE BOX An easy, affordable and safe way to stow your gear Fits in front or rear of wheel well�frees entire truck bed to accommodate larger loads Reversible hinged lid opens from left or right allowing easy access to contents. Tough blow-molded black polyethylene is unaffected by chemicals, fuels, lubricants, etc. Partition (included) can be used to form a small compartment above wheel well to hold smaller items. Includes mounting screws and key. For mini- and mid-size pickups storage box is approx. 9"W x 16"H x 38"L. For full-size pickups storage box is approx. 9"W x 20"H x 38"L. Applications: All Makes All Models SKU: 20ZX0228T
Rear Anti-Sway Bars
REAR ANTI-SWAY BARS 4140 alloy spring steel, heat formed and treated for maximum strength Optimum road feel and increased handling control on corners, uneven road surfaces, in cross winds and quick lane changes. Bolt-on installation�no drilling required. Includes hardware, special polyurethane bushings, instructions. Due to special shipping requirements, cannot ship UPS Next or 2nd Day. Applications:1980-1986 Ford F-Series Pickup 1/2-ton SKU: 18ZX9121N
Power Plus Crosswind Manifold
STREET PERFORMANCE ALUMINUM INTAKE MANIFOLD For Ford vehicles with small-block 289, 302W, 5.0L non-EGR engine High-velocity runners distribute air into engine to maximize power and efficiency Dyno tested to increase horsepower up to 17%! Outstanding power from idle to 1500-6500 RPM A great looker, great performer plus it's easy to install and offers multiple performance-building options. High-rise design for optimum power while retaining good throttle response and bottom-end power. Includes rear water crossover with 2 extra NPT ports, nitrous bosses plus washer/stud kit to simplify installation. Open area gap under plenum allows free airflow to keep intake charge denser and cooler for more power and torque. Rear water crossover passage. For street, use 600 CFM vacuum secondary carburetors; for performance/racing, use 750-800 CFM performance or double-pumper carb. A direct replacement to stock manifold. Street-legal part for 1965-66 Shelby Mustang with 289 CID V8 and OEM carb. Features 2 distributor hold-downs and cast-in bosses for nitrous nozzles and corner water outlets. No provisions for exhaust-heated choke. Limited one-year warranty. Applications: All Makes All Models for '57-95 Ford Small-block 289; 302W; 5.0L non-EGR Engine SKU: 48ZX8019W
