Rancho RS9000X Adjustable Shock @ JC Whitney Auto Parts store
Rancho RS9000X Adjustable Shock
RS9000X? 9-POSITION ADJUSTABLE SHOCK Application-specific 15-stage velocity-sensitive valving Easily adjust when mounted on vehicle with double O-ring sealed control knob 9-position adjustable damping controls both compression and rebound action for precise control on or off the road! Additional features: tri-tube monoflow design for maximum cooling efficiency and fade resistance; red urethane bushings for maximum durability; full displacement piston with upgraded Nitrile piston seal; internal rebound bumper; 5/8" diameter hardened, double-chromed rod; 240-hour salt spray-resistant exterior finish; tough, resilient accordion-pleated red rubber shock boot (included) provides all-weather protection against dirt and grime. Shock is available for most 2- or 4-wheel drive domestic or imported light trucks and SUVs with stock or lifted suspensions (up to 4" maximum, depending on application). Limited lifetime warranty. Rancho? 60-day Free Ride Offer on RS9000X? Shock Absorbers! The best performance truck shock is now backed by the ultimate satisfaction guarantee. Try a set of 4 Rancho? RS9000X? shock absorbers for 60 days. Rancho? is so confident that you will be completely satisfied with these shocks, they're making this exclusive trial offer. If for any reason, you are not satisfied with the performance of your new Rancho? RS9000X? shocks, Rancho? will refund the full purchase price of the shocks?no questions asked. Customers can call 800-521-6754 to make a claim on the Rancho? 60-day Free Ride offer*. * Offer may be withdrawn at any time. Offer covers only Rancho? RS9000X? shock absorbers. Offer does not include units improperly installed or substituted. Valid sales receipt is required to verify purchase. Valid only on vehicles used for private non-commercial use. Valid only if shocks are installed on a stock suspension, or a Rancho? Suspension System. Rancho? will pay up to $50 in labor for removal and replacement of shocks. Applications:1987-1996 Dodge Dakota 4WD; Lifted Height: 0-1",1999-2001 Cadillac Escalade Lifted Height - 0",1982-1993 Chevrolet S10 Pickup Lifted Height - 0-2",1983-2001 Chevrolet S10 Blazer Lifted Height-0" (Inc. Sport; Not ZR2 Highride),1983-1993 Chevrolet S10 Blazer Lifted Height - 0",1992-1994 Chevrolet Blazer - Full Size Lifted Height - 0-1",1992-1999 Chevrolet Suburban Lifted Height - 0-1",1994-2001 Chevrolet S10 Pickup Lifted Height 0-2",1994-2001 Chevrolet S10 Blazer Lifted Height - 0",1995-1999 Chevrolet Tahoe Lifted Height - 0-1" SKU: 49ZX3008T
Power Airaid Throttle Body Spacer Kits
THROTTLE BODY SPACER KIT Better fuel economy�tests prove a 10% increase in miles-per-gallon over stock! Dramatic improvement in mid-range power and torque! Easy to install in less than 30 minutes�no drilling or cutting required 6061-T6 billet aluminum. Brackets, gaskets, hardware and instructions included. For carburetor equipped vehicles. See bottom of page. Applications:1997-2002 Ford Expedition 4.6L,1997-2002 Ford F-Series Pickup 4.6L,1997-2002 Ford Expedition 4.6L,1997-2002 Ford F-Series Pickup 4.6L,1997-2002 Ford Expedition 4.6L,1997-2002 Ford F-Series Pickup 4.6L SKU: 48ZX6686U
Pacesetter TFX Performance Kat-Back Exhaust System
TFX� PERFORMANCE KAT-BACK EXHAUST SYSTEMS WITH STAINLESS STEEL TIPS Power gains of 10-20 HP plus a deep, throaty sound Street legal in all 50 states! System comes complete with one of the finest mufflers sold today! The TFX� Power muffler has a flow-through core that minimizes back pressure and maximizes flow. Strong welded aluminized steel�no packing to wear out. Chrome-plated T304 stainless steel tips are welded to tailpipes. Long-life aluminized rust-resistant 16-gauge steel tubing is mandrel bent to reduce power-robbing restrictions and increase exhaust flow. The results: Performance gains plus improved engine efficiency. All have dual outlets except (C) which have single outlets. The entire system has flanged joints, not slip joints, for easy bolt-on installation. System follows OE factory routing�no drilling, no clearance or heat problems. Tips exit at stock locations. Installs using existing hangers. Kit includes all pipes behind the catalytic converter, muffler, exhaust tips, hardware and instructions. Cannot be shipped express. WB=wheelbase. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Will not fit vehicles with 8-lug wheels. (B) Will not fit late 1993 models with rod-type exhaust hangers. (D) Includes muffler, tailpipe and tip only. Applications:1987-1996 Ford Bronco - Full Size 4WD 302 5.0L; 351 5.8L SKU: 22ZX2978R
Rod Bearings
CONNECTING ROD BEARING SET Save 20% on Selected Items! Perfectly matched set Precision made to SAE specifications For American cars and trucks Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1955-1967 GMC All Models with V8 265; 283; 302; 327 engine,1955-1967 Chevrolet All Models with V8 265; 283; 302; 327 engine SKU: 31ZX1196Y
Replacement Steel Gas Tanks
GAS TANKS Tank accessories sold separately Reinforced heavy-gauge steel with electronically welded seams. Sending units not included. Applications:1945-1949 Jeep CJ2A (Under-seat Tank)(Only One Required),1948-1953 Jeep CJ3A (Under-seat Tank)(Only One Required),1953-1964 Jeep CJ3B (Under-seat Tank)(Only One Required),1968-1971 Jeep CJ5 (Under-seat Tank)(Only One Required),1968-1971 Jeep CJ6 (Under-seat Tank)(Only One Required) SKU: 81ZX7187P