FUEL SAVERS - MAGNETIC Tested and approved by an EPA accepted laboratory to increase fuel economy up to 11.6%! Designed to dramatically reduce pollution Fuel injector nozzles stay clean by removing carbon and varnish buildup The cost of these devices is a small price to pay for the money you'll save, the performance boost you'll enjoy and the good you'll be doing for the environment! Your engine will have more power, run smoother, last longer and require less maintenance. Each unit eliminate the need for expensive high-octane fuel and additives (unless recommended by manufacturer). When gasoline remains in your tank over time, the fuel molecules start to cluster. The molecules on the inside of these clusters can't be exposed to the oxygen necessary for combustion. The result is incomplete fuel burn with the unburned molecules emitted as pollution or remaining inside the engine as damaging carbon/varnish deposits. The Fuel Savers fit easily over the inbound fuel line (straps included, no special tools required). They deliver an abrupt designed magnetic field to break up these fuel clusters, exposing all molecules to the oxygen, ensuring the best fuel burn possible! Each works on every vehicle, every time�the EPA accepted laboratory test and repeated demonstrations at authorized diagnostic/emissions inspection centers prove it. CARB exemption #D-421. For carbureted and fuel-injected vehicles. Applications: All Makes All Models SKU: 47ZX0779U
Neon Single-color Accent Tube
SINGLE-COLOR ACCENT TUBES Install anywhere�inside or out! Long-lasting neon is sealed in a water-proof, high-impact Lexan� tube Select from a variety of colors and end caps Mini 3", 5", 6", and 9", tubes have 3-ft. cord that plugs into a separate power transformer (included). 10", 15", and 20", tubes have built-in transformer. Transformer plugs into lighter socket or wires to 12-volt system (only 2 wires to hook up). Choose standard tubes with black end caps, Iglow Series tubes with translucent plastic end caps color-matched to the neon or Chrome Series tubes with chrome-colored end caps. Include brackets, hardware and instructions. Limited lifetime warranty. NOTE: Check local laws before ordering. Applications: All Makes All Models SKU: 81ZX6837A
Off-Road Knobby Tread
FRONT AND REAR OFF-ROAD KNOBBY TREAD MOTORCYCLE TIRE (TUBE) Tall, wide-spaced knobs have exceptional bite Inner tube and rim strip sold separately A top performer in soft to intermediate terrain Aggressive tread pattern features a unique double-curved configuration of knobs and grooves that provides needed balance between traction, steering and responsiveness. Special high-performance rubber compound has the toughness and durability needed over rough terrain. Tire bead is reinforced with an extra layer of nylon for added strength and to help prevent bead breaking. 2-ply nylon cord construction with 4-ply rating (load range "B"), except (A) which has 6-ply rating (load range "C"). Note: Ply figures given are ply ratings ("PR" as shown on tire), not actual ply construction. Designed for off-road use only. How To Order. Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter. (MS) Metric sizes Tire Width in millimeters/Sidewall Height as a percent of tire width x Rim Diameter in inches. Applications: All Makes All Models SKU: 62ZX2059R
Men's Aerolite Jackets
MEN'S AEROLITE� JACKET Comfortable, affordable and great looking Fully-lined polyester mesh�lightweight and easy to wear Sewn-in temperform padding in the shoulders, elbows/forearms, lower back and spine The perfect 3-season jacket! Removable "armor" (temperform padding with black mesh lining, reinforced with sewn-on vented heavy-duty plastic) on the shoulders and elbows/forearms helps absorb impacts. Removable dual-density spine pad helps shield a vulnerable area from spills. Scotchlite reflective piping on the back for added safety. Zippered front closure, 2 zippered side pockets plus one inside chest pocket. Each sleeve has hook/loop-closure cuff plus 2 black nylon web straps with a 2-position snap to let you "custom" adjust sleeve width (fullness). Machine washable. HOW TO ORDER. Use a tape measure to take all measurements (for greatest accuracy, measurements should be taken by someone other than yourself). Then, use the SIZE CHART to find the jacket size that best fits all your measurements. Chest Size. Measure across the fullest part of chest, keeping tape tight and level. Waist Size. Measure around that point on your waist where you wear your belt. Sleeve Length. With your arm hanging relaxed (and slightly bent) at your side, measure from the back of the neck over the top of shoulder and down the outside of the arm to the wrist bone. Important: This jacket has extra length built into the sleeve. Do NOT compensate for extra sleeve length; simply use the actual length measured. Please Note: Sizes are based on 5'6" to 6'2" height measurements. Chest Waist Sleeve Jacket Size 40 32 33-1/2 40 42 34 34 42 44 36 34-1/2 44 46 38 35 46 48 40 35-1/2 48 50 42 36 50 52 44 36-1/2 52 54 46 36-1/2 54 Applications: All Makes All Models SKU: 01ZX5665U
MB Acoustics Digital-Ready Amplifiers
400- TO 1000-WATT DIGITAL-READY AMPLIFIER Dual electronic crossovers with variable low and high-pass filters Dual super bass boost controls let you add 6 dB or 12 dB of bass Linear output transistors deliver cleaner digital sound over a wide acoustic range Digital audio-grade capacitors with copper leads guarantee amp can reproduce loud, rapidly changing digital music. Other features include: massive heat sink; quick-recovery diodes; noise filter; high-energy MOSFET power supply; 7-way protection; bridgeable to 2 channels or mono output; 2-Ohm stereo stable; turn-on delay with soft start; LED status indicators; gold-plated terminals and RCA inputs. Approximately 9.8"W x 2.3"H. For 12-volt negative-ground systems. Applications: All Makes All Models Peak Output (into 2 Ohm): 400-Watts (200 Watts x 2); Bridged Output (into 4 Ohm): 200 Watts x 1; 10"L SKU: 47ZX3052T
