NOS Nitrous Oxide System @ JC Whitney Auto Parts store
NOS Nitrous Oxide System
NITROUS OXIDE SYSTEM KITS AND ACCESSORIES All the benefits of nitrous in safe, reliable and amazingly effective systems! Kits use breakthrough "dry" injection technology�original-equipment fuel injection provides the required additional fuel to the engine only when the nitrous system is armed and activated at wide-open throttle Computer-controlled sensors go into open-loop mode, allowing nitrous oxide system to work with existing fuel-injection system resulting in impressive power increases Easy installation. Kits include 10-lb. nitrous bottle solenoids (tanks are shipped empty), filters, fittings, nozzles, switches, braided steel hoses, hardware and instructions. Not for turbo or supercharged cars. Accessories sold separately. Requirements: Kits are designed for use with a basically stock engine. A stock fuel pump should be adequate, but check to make sure it meets your car's new specifications. Use only premium-grade pump gas (92+ octane) or unleaded racing fuel. A high-output ignition and a freer-flowing exhaust may enhance performance. Do not use aftermarket chips or other devices that advance ignition timing. Applications: All Makes All Models SKU: 47ZX2931R
Molded Tread Steps
MOLDED TREAD STEPS Fit 3-1/2"W x 2-1/4"H oval tubular step rails only Add custom styling and provide the nonslip textured step surface oval rails don't For Dodge standard and extended-cab pickups and SUVs UV-resistant black molded plastic steps won't fade. Install easily and permanently with 3M� acrylic foam adhesive tape. No drilling required. Sold in pairs. Shipped separately from factory. Applications: Dodge Pickup - Full Size, Dodge Durango Extended Cab, Dodge Dakota Extended Cab SKU: 94ZX8962PF
Monroe Reflex Shocks
SHOCKS Save 20%! For trucks and SUVs Made to deliver optimum safety and control on any surface without sacrificing a great ride Ensure better tire-to-road contact than any other shock! Maximum safety, maximum control, maximum comfort! Stable in turns, responsive on bumps. Test proven to reduce body roll rate up to 12% during hard corning (figure based on comparison to new original-equipment shocks). Reduced forward pitch rate up to 18% in ABS brake exercises. A giant leap beyond velocity-sensitive damping, Monroe's Impact Sensor� reacts to "acceleration" that results from tire impacts, responding faster to changing road conditions. When it senses a bump in the road, it opens in 12 milliseconds, allowing the shock to absorb the impact. The switch then closes in 15 milliseconds to return to firm, comfortable control. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1983-1993 GMC S-15 Jimmy 2WD,1983-1993 Chevrolet S10 Blazer 2WD,1982-1993 GMC S-15 Pickup 2WD,1982-1993 Chevrolet S10 Pickup 2WD SKU: 47ZX5545U
Magnetic Fast Flames & Teardrop Graphics
MAGNETIC FAST FLAMES AND TEARDROP GRAPHIC SETS Magnetic backing for quick installation, effortless design changes and quick removal! Hot, multicolored accents make car, truck or cycle a real standout! Fade-resistant .015" thick vinyl with magnetic backing won't fall off�wind tunnel tested at 110 mph. Great for dressing up tool boxes, too. Custom color sets include 2 large (5-1/2"H x 23-1/2"L) flames, 2 mid-size (2"H x 11"L) and 2 flame licks (1-1/2"H x 5-1/2"L). Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models SKU: 81ZX7414Y
MB Acoustics Digital-Ready Amplifiers
400- TO 1000-WATT DIGITAL-READY AMPLIFIER Dual electronic crossovers with variable low and high-pass filters Dual super bass boost controls let you add 6 dB or 12 dB of bass Linear output transistors deliver cleaner digital sound over a wide acoustic range Digital audio-grade capacitors with copper leads guarantee amp can reproduce loud, rapidly changing digital music. Other features include: massive heat sink; quick-recovery diodes; noise filter; high-energy MOSFET power supply; 7-way protection; bridgeable to 2 channels or mono output; 2-Ohm stereo stable; turn-on delay with soft start; LED status indicators; gold-plated terminals and RCA inputs. Approximately 9.8"W x 2.3"H. For 12-volt negative-ground systems. Applications: All Makes All Models Peak Output (into 2 Ohm): 1000-Watts (500 Watts x 2); Bridged Output (into 4 Ohm): 500 Watts x 1; 15.8"L, All Makes All Models Peak Output (into 2 Ohm): 1000-Watts (500 Watts x 2); Bridged Output (into 4 Ohm): 500 Watts x 1; 15.8"L SKU: 47ZX4065U
