Gabriel Gas Strut Assemblies @ JC Whitney Auto Parts store

 24Hour-Store.com Online shopping mall



 

Search For:


Gabriel Gas Strut Assemblies

STRUT ASSEMBLY Save 20% on Selected Items! High-pressure nitrogen gas charge ensures superior handling, stability and control without loss of highway driving comfort! Gas charge allows the fastest and best response to the changing road conditions Performance engineered by Gabriel� to meet he individual driving requirements of your car! Highly pressurized gas resists compression and aids rebound to keep your tires in contract with the road. The pressure also reduces the fluid foaming that causes faulty dampening and fade. Exclusive Gabriel� velocity sensitive technology (VST) is instantly self-adjusting, resulting in faster reaction to the performance demands of your car. VST� included (except where noted). All-weather fluid provides more consistent performance at temperature extremes�contains additives for extended service life. Limited lifetime warranty. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1983-1987 Mazda 626 (exc. with Electronic Adjustable Suspension)
SKU: 71ZX0232T

Inside or Outside Mount Third Brake Light

THIRD BRAKE LIGHT Quick and easy inside or outside mount Logic circuit sold separately For pickup cabs and caps Perfect as an extra brake light�or when the addition of a cap blocks existing light. Mounts to the upper or lower part of window frame (brackets, screws and double-sided tape included). Gives extra warning to drivers behind you�helps prevent rear-end collisions. Black polycarbonate housing (approx. 6-1/2"W x 1-1/2"H x 1-3/8"D) with 2 easy-to-replace bulbs. Tough red Lexan? lens won't break or fade. Includes hardware and instructions. For 12-volt negative-ground systems. Order logic circuit separately. Logic Circuit. For vehicles without OE third brake light or vehicles without separate brake and turn signal lights. 3-wire hookup. Includes instructions. Applications: All Makes All Models
SKU: 73ZX9271P

Gear Reduction Starter

PERFORMANCE GEAR REDUCTION STARTER Ends all hot start problems�forever! One year manufacturer warranty Get total starting power! Far superior to original equipment. 100% more torque�4.4:1 gear reduction, roller bearing support and integrated solenoid ensure this starter can crank any engine, no matter how high its static compression. 200% more cranking power. More starts�20,000 starts vs. 5,000 for stock. Uses less amperage. Turns faster under load, slower under no load and is more cold-weather resistant. Enhanced rock/hill climbing ability with clutch-free starting. 1/3 smaller size and weight for easy installation. Heavy-duty construction and extreme reliability are the primary hallmarks of this performance gear reduction starter. Five sealed ball bearings increase efficiency, reduce wear and thrive under extreme conditions, like water intrusion. Integral solenoid is corrosionproof and heat-sinked to prevent overheating and thermal breakdown. Stainless steel mainshaft provides direct line engagement, which increases even further efficiency, power and reliability. Also, the rotating billeted aluminum nose cone adapter can be turned in 20� increments (depending on application) to clear headers, oil pans or other obstacles. Depending on application there are dual-bolt patterns so they fit both the 153-tooth and 168-tooth flywheels. PSI certified and approved. All applications are for gas engines except where noted. Applications:1988-1998 Jeep All Models 6-cyl 4.0L; 4.2L
SKU: 81ZX5820Y

Injen Race Division Cold Air Intake System

RACE DIVISION ALUMINUM COLD AIR INTAKE SYSTEM New one-piece design for smoother airflow! CNC mandrel-bent aerospace-quality 6061 aluminum tube�much lighter than the competition Boosts HP and torque! Air intake and filter are placed low in the engine compartment to draw in colder air for more power! Tube length, diameter and bend radius are tuned for maximum power. Dynojet Dynomometer tested before shipment. Precision CNC-machined brackets are welded on to simplify installation. Kit includes high-performance 4-ply Injen filter and all hardware. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:2002 Mazda Protege 5; 2.0L
SKU: 49ZX0764UF

Hidden Hitch Class III Trailer Hitch

CUSTOM-FIT CLASS III RECEIVER HITCH For trucks, SUVs, vans and cars Revolutionary rust-resistant finish exceeds 500-hour spray-testing�that's equal to 5 winters! Custom designed for easy bolt-on installation to vehicle's frame with minimal or no drilling for most applications Up to 10,000-lb. GTW (Gross Towing Weight) when used with a weight-distributing hitch, 3,000- to 6,000-lb. weight-carrying capacity, 300- to 600-lb. tongue weight. Long, wide frame brackets for maximum strength and load distribution. Attach to vehicle's frame with minimal or no drilling. Long, wide frame brackets for maximum strength and better load distribution. Dip process coats inside of receiver channel�the first place rust normally occurs. Includes wiring connector bracket for easier electrical hookup and no dangling wires. Accepts 2" square ball mounts in a variety of lengths, drops and rise to level trailer tongue. Ball mounts sold separately. Meets or exceeds SAE standards. Do not exceed rated tow capacity of towing vehicle. Limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck/air freight. How To Order Trailer Hitches. Determine the Gross Towing Weight (GTW) and tongue weight (TW) of your trailer. The GTW is the weight of the trailer fully loaded and ready for towing. The TW is the downward push exerted on the hitch ball by the trailer coupler. Check your owner's manual to find the maximum GTW and TW for your vehicle. Important: Do not tow the trailer if either the GTW or the TW exceeds the towing vehicle's maximum towing capacity. Order ball, ball mount and wiring connectors separately. Wire code letters indicate the connectors or converters that are recommended for the Class III hitch. Other accessories that may complete your desired towing package: ball mount; trailer ball; pin and clip; receiver tube cover; hitch lock; safety chain; bike carrier; taillight connector; plug-in T-connector; taillight converter; brake controller; weight distribution; sway control; hitch light; transmission cooler. Wire Code Letters P Power isolation converter is required C Standard converter is required W 4-wire connector is required T T-connector harness with necessary built-in converter or power converter may be available (plugs directly into your vehicle's wiring harness) Order all converters and connectors seperately. Weight Rating (in lbs.) With Ball Mount With Weight-Distributing Hitch Rating Code GTW TW GTW TW F 3,000 300 4,000 350 G 3,000 300 5,000 550 H 3,500 300 3,500 300 I 3,500 300 5,000 550 J 3,500 300 6,000 600 K 3,500 500 10,000 1,000 With Ball Mount With Weight-Distributing Hitch Rating Code GTW TW GTW TW L 5,000 500 5,000 500 M 5,000 500 7,500 750 N 5,000 500 8,000 800 O 5,000 500 10,000 1,000 P 6,000 600 6,000 600 Q 6,000 600 10,000 1,000 GTW=Gross Trailer Weight TW=Tongue Wei
SKU: 07ZX0201X



© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.