AC - CUSTOM IN-DASH SYSTEM In-dash installation requires no modifications! Complete system includes all in-dash and under-hood components Uses ozone-friendly R-134a refrigerant. Evaporator, drier, hoses, condenser, compressor, compressor mount, brackets, drive pulley, belts, plus installation hardware, parts and instructions included. Dash control package, heavy-duty fan, fan shroud kit, engine idle-up kit or louver/accessory package are also included (when required). Must be charged with R-134a refrigerant (not included). Limited 12-month warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Warranty: SCS/Frigette warrants all air conditioning parts for a period of 12 months or 12,000 miles, whichever comes first. Labor for warranty or replacement parts is excluded. (A) Diesel model must be equipped with vacuum pump. Applications:1995-1999 Toyota Tercel SKU: 76ZX0049WF
Heat Exchanger Repair Kit
HEAT EXCHANGER REPAIR KIT Repairs connection between heat exchanger and muffler�the weakest part and cause of heat loss. Simply saw old connection off and slip pipe in place. Includes 2 repair pipes to service both heat exchangers. Fits all '63-78 Volkswagens with air-cooled engines except 411 and 412. Applications:1963-1978 Volkswagen All Models Air-cooled SKU: 89ZX5579B
Hidden Hitch Class II Trailer Hitch
CUSTOM-FIT CLASS II RECEIVER HITCH For cars, trucks, SUVs and vans Revolutionary rust-resistant finish exceeds 500-hour spray-testing?that's equal to 5 winters! Custom designed for each vehicle for easy bolt-on installation and better fit 3,500-lb. GTW (Gross Towing Weight), 300-lb. tongue weight. Custom designed for easy bolt-on installation. Steel drawbar secures directly to vehicle's frame, removes instantly to improve appearance and prevent bruised shins. Small 1-1/4" receiver opening is virtually invisible when drawbar is removed. Built-in wiring bracket arm. Meet or exceed SAE standards. Includes removable ball mount, pin and clip, receiver tube cover, hardware and instructions. Do not exceed rated tow capacity of towing vehicle. Limited lifetime warranty. How To Order Trailer Hitches. Determine the Gross Towing Weight (GTW) and tongue weight (TW) of your trailer. The GTW is the weight of the trailer fully loaded and ready for towing. The TW is the downward push exerted on the hitch ball by the trailer coupler. Check your owner's manual to find the maximum GTW and TW for your vehicle. Important: Do not tow the trailer if either the GTW or the TW exceeds the towing vehicle's maximum towing capacity. Order ball, ball mount and wiring connectors separately. Wire code letters indicate the connectors or converters that are recommended for the Class II hitch. Other accessories that may complete your desired towing package: ball mount; trailer ball; pin and clip; receiver tube cover; hitch lock; safety chain; bike carrier; taillight connector; plug-in T-connector; taillight converter; brake controller; weight distribution; sway control; hitch light; transmission cooler. Wire Code Letters P Power isolation converter is required C Standard converter is required W 4-wire connector is required T T-connector harness with necessary built-in converter or power converter may be available (plugs directly into your vehicle's wiring harness) � Order all converters and connectors separately. Applications:1991-1994 Oldsmobile Bravada,1983 GMC S-15 Jimmy,1984-1994 GMC S-15 Jimmy,1983-1994 Chevrolet S10 Blazer SKU: 86ZX6244N
Gabriel Performance Mono-Tube Gas Shocks
MONOTUBE SHOCK Delivers a steadier ride with more control than twin-tube shocks Responds quicker than any other shock! Seamless tube keeps shock cooler and prevents leaks Multidisk design for precision custom tuning and maximum damping. Nitrogen gas (up to 275 psi) and floating piston reduce fade up to 75% more than other shocks. Application-tuned valving. Strong yet 10% lighter than most OEM shocks for better control. Used as OEM in many new Lexus, Infiniti, Chevy and Ford SUVs. Huge 46mm bore reacts to bumps and absorbs impacts fast. Chrome-plated hardened 14mm piston (20% larger than standard rods). Applications:1994-1997 Mazda Pickup B-Series,1990-1997 Ford Ranger 2WD,1989-1990 Ford Bronco II SKU: 47ZX9176U
High-Performance Dual Exhaust System
HIGH-PERFORMANCE DUAL EXHAUST SYSTEM KITS AND TURBO MUFFLERS For '62-81 American header-equipped passenger cars Custom fit�no cutting, welding or bending Reduce back pressure and increases horsepower Mandrel-bent system available in heavy-duty 16-gauge aluminized or 14-gauge T-409 stainless steel Tailpipes mount and exit at stock location behind rear wheel or under rear bumper. Extra-large 2-1/4" diameter tubes help prevent restrictions that rob engine of power and reduce efficiency. Fit all headers with 3" collectors. Kits include 2 tailpipes, header pipes, reducers, muffler clamps, exhaust clamps, hangers, header flanges, header pipe gaskets and mounting hardware. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Check local emissions laws before ordering. NOTE: This product is intended for off-road or racing use only and is not intended or applicable for highway use. Not legal for sale or use on California pollution-controlled motor vehicles. Turbo mufflers for dual exhaust systems sold separately. Applications:1970-1973 Mercury Cougar 289; 302; 351; 390; 427; 400 V8,1967-1968 Mercury Cougar 289; 302; 351; 390; 427; 400 V8,1964-1973 Ford Mustang 289; 302; 390; 351 V8 SKU: 22ZX2901A
