High Lift Front Coil Springs @ JC Whitney Auto Parts store

24Hour-Store.com Online shopping mall



 

Search For:


High Lift Front Coil Springs

HIGH-LIFT FRONT COIL SPRINGS A safety must for heavy-duty or off-road use! Approx. 10 to 20% stiffer than stock coils Built to survive the worst conditions. Perfect for additional front-end lift on trucks with snow plow or winch�or to replace worn, sagging springs, etc. Hot-rolled, hot-wound, stress-relieved steel is epoxy coated to resist corrosion. Available with lift indicated to level or raise vehicle. Installation may require realignment of front end. Sold in pairs. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Also includes one pair of bronze camber/caster alignment bushings (front-end alignment corrections cannot be made with stock bushings when high-lift springs are installed). Applications:1983-1988 Ford Bronco II 2WD; 1-1/2" to 2" lift,1983-1988 Ford Ranger 2WD; 1-1/2" to 2" lift
SKU: 94ZX4171BF


Hidden Hitch Class l Trailer Hitch

CUSTOM-FIT CLASS I RECEIVER HITCH For cars, SUVs and vans Revolutionary rust-resistant finish exceeds 500-hour spray-testing?that's equal to 5 winters! Custom designed for each vehicle for easy bolt-on installation and better fit 1,000- to 2,500-lb. GTW (Gross Towing Weight), 100- to 200-lb. tongue weight. Custom designed for easy bolt-on installation. Steel drawbar secures directly to vehicle's frame, removes instantly for a cleaner look. No damaged shins. Small 2" x 5/8" receiver opening is coated throughout for complete weather resistance. Meet or exceed SAE standards. Includes removable ball mount, pin and clip, receiver tube cover, hardware and instructions. Do not exceed rated tow capacity of towing vehicle. Limited lifetime warranty. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. How To Order Trailer Hitches. Determine the Gross Towing Weight (GTW) and tongue weight (TW) of your trailer. The GTW is the weight of the trailer fully loaded and ready for towing. The TW is the downward push exerted on the hitch ball by the trailer coupler. Check your owner's manual to find the maximum GTW and TW for your vehicle. Important: Do not tow the trailer if either the GTW or the TW exceeds the towing vehicle's maximum towing capacity. Order ball, ball mount and wiring connectors separately. Wire code letters indicate the connectors or converters that are recommended for the Class I hitch. Other accessories that may complete your desired towing package: ball mount; trailer ball; pin and clip; receiver tube cover; hitch lock; safety chain; bike carrier; taillight connector; plug-in T-connector; taillight converter; brake controller; weight distribution; sway control; hitch light; transmission cooler. Wire Code Letters P Power isolation converter is required C Standard converter is required W 4-wire connector is required T T-connector harness with necessary built-in converter or power converter may be available (plugs directly into your vehicle's wiring harness) � Order all converters and connectors separately. Applications:1993-1997 Eagle Vision,1993-1997 Dodge Intrepid,1993-1997 Chrysler Concorde,1993-1997 Eagle Vision,1993-1997 Dodge Intrepid,1993-1997 Chrysler Concorde,1993-1997 Eagle Vision,1993-1997 Dodge Intrepid,1993-1997 Chrysler Concorde,1993-1997 Eagle Vision,1993-1997 Dodge Intrepid,1993-1997 Chrysler Concorde
SKU: 86ZX7119Y


Halogen Cycle Headlights

55-WATT H-4 HALOGEN CYCLE HEADLIGHTS Super-bright twin filament is 2-1/2" times more powerful than stock headlights Available in round or rectangular Converts standard headlight to halogen for safer, brighter lighting 55- and 60-Watt low and high beams. See far ahead of your motorcycle! Halogen element produces a piercing, thin-line, high-intensity beam for better vision and added safety. Designed to withstand the extra shock and road vibration that your motorcycle takes. Easy to install. Fits all 12-volt headlights�also replaces fairing headlights. Always carry an easy-to-install spare bulb (sold separately) in case of emergency, so you can continue safely and legally. NOTE: 5-3/4" round headlight fits fairing mounts only; will not fit in OEM headlight case. Replacement H-4 bulbs available in 55/60 Watt or powerful 80/100 Watt. Applications: All Makes All Models, All Makes All Models
SKU: 13ZX9313T


Headsup Headliner Fabric Replacement Kits

HEADLINER FABRIC REPLACEMENT KITS Eliminate ceiling sag Replacement headliner fabric restores vehicle's interior and increases resale value Each kit includes enough material to completely refinish headliner Material trims easily to right size. Easy to install in just one hour. One roll of headliner material plus 2 dome light clips included. Quick-Fix� Headliner Adhesive sold separately (SKU# 50ZX1740R). Click on item SKU# for additional information. Applications: All Makes All Models
SKU: 50ZX1736X


Holley Throttle Body

HIGH-FLOW EFI THROTTLE BODY Polished billet aluminum machined to perfection The best air supply available for a real horsepower boost! Easy to install. All vacuum ports and linkage included. Can be used with stock TPS (throttle position sensor) and IAC (idle auto control). 1" x 68mm. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1996-2000 Acura Integra 1.8L
SKU: 47ZX5992Y






© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.