Dual Wheel Adapter @ JC Whitney Auto Parts store

DUAL WHEEL ADAPTER SETS Converts your single rear wheels to dual for increased payload Improves sway control, a must for campers Heavy-duty steel dual wheel adapters let you use your present wheel and tires together with spare tires (wheels and tires not included). Simple installation with regular lug wrench: 1. Mount first wheel, 2. Screw on extension bolts, 3. Slip on adapter, 4. Mount second wheel. Fit trucks and trailers with drop-center or standard wheels. Use only with standard width rims and tires. Not for vans with sliding side door or use with aluminum wheels, original-equipment dual wheels or Budd wheels. 2 adapters, extension bolts and instructions included. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1982-1998 Chevrolet S10 Pickup,1982-1998 Ford Ranger,1982-1998 GMC S-15 Pickup,1972-1998 Mazda Pickup Piston,1967-1998 Toyota Land Cruiser,1964-1998 Nissan Pickup,1979-1993 Dodge D50 Pickup,1969-1993 Toyota Pickup,1982-1988 Isuzu Pickup,1972-1983 Chevrolet LUV Pickup,1972-1983 Ford Courier,1979-1982 Plymouth Arrow
SKU: 78ZX6951NF

DUAL EXHAUST CONVERSION SYSTEMS Convert stock single exhaust to more efficient dual! Tailpipes exit at stock location For '63-86 American trucks and vans Aluminized mufflers sold separately. (A): Dual Kit runs down the passenger side between frame and driveshaft. (B): System mounts below frame. (C): Will not fit '68-72 pickups with "camper special" gas tank. (D): Will not fit super cab. (E): Will not fit stock manifolds that exit straight down. (F): If wheelbase is 131-1/2" or greater, tailpipe extensions are required for proper tailpipe exit. (G): Both tailpipes exit on driver's side behind rear tire. (H): Dual kit runs outside frame. Applications:1963-1972 Chevrolet C/K Pickup 2WD 1/2- and 3/4-ton w/293-400 Small Block Engine,1963-1972 GMC C/K Pickup 2WD 1/2- and 3/4-ton w/293-400 Small Block Engine
SKU: 22ZX2906P

EMERGENCY BRAKE CABLE Applications:1976-1978 Jeep CJ5 Brake Size: with 11" Brakes,1976-1978 Jeep CJ7 Brake Size: with 11" Brakes
SKU: 49ZX9109T

PREMIUM MOTOR OVERHAUL GASKET SET The finest quality gasket set available on the market! Exceeds original equipment specifications! Teflon� coated head and manifold gaskets never need retorquing! Ceramic-based material replaces asbestos in exhaust rings and compresses excellently, conforming to irregular surfaces. Set contains more gaskets than most other sets. Manufactured with premium-quality materials. Made thicker to compensate for any surface irregularities. Set includes: cylinder head gaskets, except (A) ; oil pan; valve cover; valve stem seals; timing cover; water pump; fuel pump mounting; oil pump; cover; necessary seals; thermostat. Set also includes intake, except (B) , and exhaust manifold gaskets and main bearing seals where necessary. Set contains permanent-torque head and manifold gaskets, except (C) and (A) . Intake manifold valley (tin) gaskets are not included in gasket set. Set includes precision-designed top-quality valve stem seals, except (D) . Some no-retorque head gaskets are made of shim steel and are not Teflon� coated. GASKET and SEAL LOCATIONS Shown are all the gaskets and seals included in the Fel-Pro� set for a typical engine. Smaller gaskets, particularly those used only on a limited number of engines, are not shown, but are also included in set. Here are some of the gaskets, seals, etc. you will receive with your set: (1) valve cover grommets; (2) valve cover; (3) valve stem seals; (4) intake manifold side rails; (5) intake manifold end seals; (6) EGR; (7) upper intake manifold (plenum); (8) thermostat gasket; (9) thermostat seal; (10) fuel injector "O" rings; (11) distributor "O" ring; (12) crankshaft repair sleeve; (13) rear main bearing seal; (14) rear main bearing seal retainer; (15) exhaust manifold; (16) exhaust pipe ring (packing); (17) head gasket; (18) oil pan; (19) timing cover; (20) water pump; (21) harmonic balancer repair sleeve; (22) timing cover (crankshaft front) seal; (23) oil pick-up. (A) Cylinder head gaskets (sold separately) and permanent-torque head and manifold gaskets not included. (B) Intake manifold gasket not included. (C) Includes standard-type head gaskets that need retorquing. (D) Precision-designed top-quality valve stem seals not included. Applications:1961-1970 Mercury All Models V8 352; 390; 406; 410; 427; 428 except Hi-Performance,1958-1976 Ford All Models V8 332; 352; 361; 390; 406; 427; 428,1958-1960 Ford Edsel V8 332; 352; 361
SKU: 37ZX9795T

PREMIUM MOTOR OVERHAUL GASKET SET The finest quality gasket set available on the market! Exceeds original equipment specifications! Teflon� coated head and manifold gaskets never need retorquing! Ceramic-based material replaces asbestos in exhaust rings and compresses excellently, conforming to irregular surfaces. Set contains more gaskets than most other sets. Manufactured with premium-quality materials. Made thicker to compensate for any surface irregularities. Set includes: cylinder head gaskets, except (A) ; oil pan; valve cover; valve stem seals; timing cover; water pump; fuel pump mounting; oil pump; cover; necessary seals; thermostat. Set also includes intake, except (B) , and exhaust manifold gaskets and main bearing seals where necessary. Set contains permanent-torque head and manifold gaskets, except (C) and (A) . Intake manifold valley (tin) gaskets are not included in gasket set. Set includes precision-designed top-quality valve stem seals, except (D) . Some no-retorque head gaskets are made of shim steel and are not Teflon� coated. GASKET and SEAL LOCATIONS Shown are all the gaskets and seals included in the Fel-Pro� set for a typical engine. Smaller gaskets, particularly those used only on a limited number of engines, are not shown, but are also included in set. Here are some of the gaskets, seals, etc. you will receive with your set: (1) valve cover grommets; (2) valve cover; (3) valve stem seals; (4) intake manifold side rails; (5) intake manifold end seals; (6) EGR; (7) upper intake manifold (plenum); (8) thermostat gasket; (9) thermostat seal; (10) fuel injector "O" rings; (11) distributor "O" ring; (12) crankshaft repair sleeve; (13) rear main bearing seal; (14) rear main bearing seal retainer; (15) exhaust manifold; (16) exhaust pipe ring (packing); (17) head gasket; (18) oil pan; (19) timing cover; (20) water pump; (21) harmonic balancer repair sleeve; (22) timing cover (crankshaft front) seal; (23) oil pick-up. (A) Cylinder head gaskets (sold separately) and permanent-torque head and manifold gaskets not included. (B) Intake manifold gasket not included. (C) Includes standard-type head gaskets that need retorquing. (D) Precision-designed top-quality valve stem seals not included. Applications:1981 Pontiac All Models for Straight 8 and V8 307,1980-1984 Buick All Models for Straight 8 and V8 307 5.0L
SKU: 38ZX1114U