Empi Roll Bar Padding @ JC Whitney Auto Parts store
Empi Roll Bar Padding
ROLL BAR PADDING Position where you want with offset hole location Padding constructed of closed-cell foam cut in 3-ft. sections with 1-1/2" diameter A hot look! Not approved for racing; recreational use only. Applications:1954-1979 Volkswagen Dune Buggy/Sand Rail,1954-1979 Volkswagen Beetle - Air Cooled,1954-1979 Volkswagen Dune Buggy/Sand Rail,1954-1979 Volkswagen Beetle - Air Cooled SKU: 49ZX7519N
Front Fender Rails
FRONT FENDER RAILS A bright way to lead the way! Chromed steel rails wrap around fender, attach to front fork Applications:1981-1983 Honda Gold Wing GL1100; Aspencade & Interstate SKU: 06ZX3694A
Everest Star Furnace for Campers
EVEREST STAR HYDRO FLAME� LP GAS FURNACES For pop-up and pickup campers Wall-mount thermostat sold separately Electronic ignition for trouble-free performance Lightweight (only 23 lbs.) and energy efficient. Require only 20-1/2" mounting depth, 8-3/8"W x 11-1/4"H clearance and 0" distance from combustibles. Easy to service from inside vehicle. Front discharge. Low amp draw. UL listed. Limited 2-year warranty. Use 12-volt DC. Thermostat (sold separately) needed for new installation. Applications: All Makes All Models, All Makes All Models SKU: 07ZX5560A
Double Roller Timing Chain Sets
3-PC. DOUBLE-ROLLER TIMING CHAIN SET Engineered for accurate, constant timing, faster acceleration and top-speed performance For '56-90 American engines Holds degree wheel accuracy by cutting down lag due to "stretch" for peak performance. Double chain provides positive drive and timing for peak power and speed from lightning-fast acceleration to full-out power. Flame-hardened double-roller cam and crank sprockets for maximum strength and long wear. Precision engineered, matched for perfect fit and quiet operation. Chain, crank and cam gear included. Applications:1956-1989 Plymouth All Models V8 engines 273; 315; 318; 325; 326; 340; 354; 360; 392,1956-1989 Dodge All Models V8 engines 273; 315; 318; 325; 326; 340; 354; 360; 392,1956-1989 Chrysler All Models V8 engines 273; 315; 318; 325; 326; 340; 354; 360; 392 SKU: 37ZX3228A
Fel-Pro Premium Gasket Sets
PREMIUM MOTOR OVERHAUL GASKET SET The finest quality gasket set available on the market! Exceeds original equipment specifications! Teflon� coated head and manifold gaskets never need retorquing! Ceramic-based material replaces asbestos in exhaust rings and compresses excellently, conforming to irregular surfaces. Set contains more gaskets than most other sets. Manufactured with premium-quality materials. Made thicker to compensate for any surface irregularities. Set includes: cylinder head gaskets, except (A) ; oil pan; valve cover; valve stem seals; timing cover; water pump; fuel pump mounting; oil pump; cover; necessary seals; thermostat. Set also includes intake, except (B) , and exhaust manifold gaskets and main bearing seals where necessary. Set contains permanent-torque head and manifold gaskets, except (C) and (A) . Intake manifold valley (tin) gaskets are not included in gasket set. Set includes precision-designed top-quality valve stem seals, except (D) . Some no-retorque head gaskets are made of shim steel and are not Teflon� coated. GASKET and SEAL LOCATIONS Shown are all the gaskets and seals included in the Fel-Pro� set for a typical engine. Smaller gaskets, particularly those used only on a limited number of engines, are not shown, but are also included in set. Here are some of the gaskets, seals, etc. you will receive with your set: (1) valve cover grommets; (2) valve cover; (3) valve stem seals; (4) intake manifold side rails; (5) intake manifold end seals; (6) EGR; (7) upper intake manifold (plenum); (8) thermostat gasket; (9) thermostat seal; (10) fuel injector "O" rings; (11) distributor "O" ring; (12) crankshaft repair sleeve; (13) rear main bearing seal; (14) rear main bearing seal retainer; (15) exhaust manifold; (16) exhaust pipe ring (packing); (17) head gasket; (18) oil pan; (19) timing cover; (20) water pump; (21) harmonic balancer repair sleeve; (22) timing cover (crankshaft front) seal; (23) oil pick-up. (A) Cylinder head gaskets (sold separately) and permanent-torque head and manifold gaskets not included. (B) Intake manifold gasket not included. (C) Includes standard-type head gaskets that need retorquing. (D) Precision-designed top-quality valve stem seals not included. Applications:1978-1985 Cadillac All Models for Non-resurfaced Cylinder Block or Pistons Projecting less than .026" on 350 diesel engine,1978-1985 Pontiac All Models for Non-resurfaced Cylinder Block or Pistons Projecting less than .026" on 350 diesel engine,1978-1985 Oldsmobile All Models for Non-resurfaced Cylinder Block or Pistons Projecting less than .026" on 350 diesel engine,1978-1985 Buick All Models for Non-resurfaced Cylinder Block or Pistons Projecting less than .026" on 350 diesel engine,1978-1985 GMC All Models for Non-resurfaced Cylinder Block or Pistons Projecting less than .026" on 350 diesel engine,1978-1985 Chevrolet All Models for Non-resurfaced Cylinder Block or Pistons Projecting less than .026" on 350 diesel SKU: 38ZX1853X
