Camshaft & Lifter Kit @ JC Whitney Auto Parts store
Camshaft & Lifter Kit
FUEL-SAVER CAMSHAFT AND LIFTER KIT Improves gas mileage and makes engine super responsive at lower speeds Improved hydraulic lifters included Efficiency-engineered camshafts have special lobe configurations that give better low-end response without wasting fuel. The best of both short and long endurance cams combined. Fast opening provides extra torque?a good choice for towing. Applications:1963-1972 Ford All Models 144; 170; 200 engines,1963-1972 Mercury All Models 144; 170; 200 engines SKU: 38ZX8615T
Bow-tie Dress-up Kit
CHROME-PLATED BOW-TIE ENGINE DRESS-UP KIT For '59-86 Chevrolet small-block engines Distinctive bow-tie emblem embossed on the valve covers, breather cap, wing nuts and spark plug looms gives these components their unique appeal All parts are made to GM specifications 20% heavier than aftermarket replacement parts. All, except grommets, are heavily chromed plated and polished to a high luster. Replace originals perfectly. Rubber grommets, dipstick with tube and hold-down clamps included. General Motors trademarks used under license to Specialty Auto Parts USA, Inc. Timing cover and tab sold separately. Applications:1976-1987 Chevrolet El Camino 6-3/4" and 7" balancers,1977-1986 Chevrolet Blazer - Full Size 6-3/4" and 7" balancers,1977-1986 Chevrolet Caprice 6-3/4" and 7" balancers,1976-1986 Chevrolet C/K Pickup 6-3/4" and 7" balancers,1976-1986 Chevrolet Suburban 6-3/4" and 7" balancers,1976-1986 Chevrolet Camaro 6-3/4" and 7" balancers,1976-1986 Chevrolet Monte Carlo 6-3/4" and 7" balancers,1977-1985 Chevrolet Impala 6-3/4" and 7" balancers,1976-1983 Chevrolet Malibu 6-3/4" and 7" balancers,1980-1982 Chevrolet Caprice 6-3/4" and 7" balancers,1980-1982 Chevrolet Impala 6-3/4" and 7" balancers,1979-1982 Chevrolet El Camino 6-3/4" and 7" balancers,1979-1982 Chevrolet Malibu 6-3/4" and 7" balancers,1979-1982 Chevrolet Monte Carlo 6-3/4" and 7" balancers,1980-1981 Chevrolet Bel-Air 6-3/4" and 7" balancer,1980-1981 Chevrolet Camaro 6-3/4" and 7" balancer,1980 Chevrolet Corvette 6-3/4" and 7" balancers,1976-1979 Chevrolet Monza 6-3/4" and 7" balancers,1976-1979 Chevrolet Nova 6-3/4" and 7" balancers,1976 Chevrolet Laguna 6-3/4" and 7" balancers,1975-1976 Chevrolet Monza 6-3/4" and 7" balancer,1975 Chevrolet Nova 6-3/4" and 7" balancer,1975 Chevrolet Vega 6-3/4" and 7" balancer,1967-1968 Chevrolet Camaro 6-3/4" and 7" balancers,1966-1967 Chevrolet Caprice 6-3/4" and 7" balancers,1964-1967 Chevrolet Chevelle 6-3/4" and 7" balancers,1964-1967 Chevrolet El Camino 6-3/4" and 7" balancers,1964-1967 Chevrolet Malibu 6-3/4" and 7" balancers,1962-1967 Chevrolet Nova 6-3/4" and 7" balancers,1961-1967 Chevrolet C/K Pickup 6-3/4" and 7" balancers,1959-1967 Chevrolet Bel-Air 6-3/4" and 7" balancers,1959-1967 Chevrolet Biscayne 6-3/4" and 7" balancers,1959-1967 Chevrolet Impala 6-3/4" and 7" balancers,1961-1966 Chevrolet Suburban 6-3/4" and 7" balancers,1962 Chevrolet Chevy II 6-3/4" and 7" balancers,1959-1961 Chevrolet Corvette 6-3/4" and 7" balancers SKU: 47ZX1827P
Auto-Dimming Mirrors
DUAL-DISPLAY AUTO-DIMMING MIRROR WITH DIGITAL COMPASS, THERMOMETER AND MAP LIGHTS Replaces your original mirror and incorporates every advanced feature for safer, easier travel Night Vision Safety� mirror is the same Gentrex mirror available in select luxury cars and trucks Eliminates the dangerous glare from vehicles in back of you Get the factory mirror without buying a new vehicle! AUTO DIMMING. At night, sophisticated sensors/circuitry detect glare from vehicle approaching from the rear, automatically darkening mirror to eliminate glare. The brighter the glare, the darker the mirror becomes. COMPASS. Self-calibrating compass uses computer technology to accurately indicate travel direction (N, NE, S, SW, etc.) on the easy-to-read digital display. THERMOMETER. Digital display accurately shows outside temperature. At 37� F or below, the word "ICE" appears to warn about potential road-icing conditions. MAP LIGHTS. 2 LED lights add extra illumination to vehicle's interior�handy for nighttime driving. Kit includes mirror, wiring harness and instructions. Installation takes about 2 hours by a person with good automotive knowledge; wiring harness must be run under headliner. NOTE: Installation in 1998 and earlier Ford vehicles and all imported vehicles requires Mirror-mount Bracket (sold separately; SKU# 50ZX3799T). Applications: All Makes All Models SKU: 49ZX5317W
Custom-fit Rail-mount Tonneau Cover
CLAMP-ON RAIL SYSTEM Great looking, easy to use bed and cargo protector No drilling�easy one-person installation with 9/16" wrench or socket! Custom fit for pickups Full-perimeter frame clamps on securely�no holes to drill, no screws, no adhesives or tape! Pre-arched bows (2 height adjustments) speed up water run-off and are strong enough to support snow buildup. Unique nylon resin fasteners work in all weather conditions. Can't rust. Allows easy access to bed at any point around rail system (front, rear and sides). Special key for easier opening. Full-perimeter bed frame made of anodized aluminum frame rails with foam backing that forms a weather-tight seal and prevents rattling; metal never touches painted surfaces. Triangular frame walls for maximum strength and minimum flex. Fiberglas reinforced tailgate corners allow effortless use/removal of tailgate rail. Continuous channel in rails makes it easy to position bows exactly where needed. Pre-arched bows are included. Sure-grip aluminum clamps and hex bolts (included) secure frame to truck bed. Slip-joint corners permit removal of end rail to accommodate bulkier cargo. Fasteners that can't pop open�the greater the tension, the tighter the grip! Unlike metal snaps, fasteners won't freeze shut in winter or become too hot to touch in the sun. Reinforced edges at fasteners where stress is greatest. Specially designed key allows cover to be zipped open or closed quickly and easily. Heavyweight 23-oz. vinyl tonneau cover features fully fitted corners, reinforced edge, handsome elk-grained texture and woven polyester backing to minimize stretch. Applications:2000 Toyota Tundra Long Bed SKU: 07ZX7175WF
Air-Adjustable Helper Springs
AIR-ADJUSTABLE HELPER SPRING KITS Improve handling and performance by adjusting vehicle to varying load conditions Adjustable to any load up to gross vehicle weight (GVW) Heavy-duty springs (bellows) install easily between axle and frame and work with existing suspension Springs are easily adjustable to improve handling or compensate for uneven loads�no loss of comfort or performance when vehicle is empty or lightly loaded. Use a service station air hose, hand pump or compressor kit (sold separately) to inflate/deflate springs. Virtually maintenance free. No moving parts. Kits include 2 springs, upper and lower mounting brackets, air fittings, air line, inflation valves, hardware and instructions. For rear except where noted. (A) Requires 7-1/2" clearance between frame and tire. (B) Sport-Rite� design for a superior ride. Fits stock or lowered trucks and lets you carry load up to vehicle's GVW. Applications:1990-1998 All Makes All Models Ford F53 Class "A" Motor Home with 15;000-; 16;000- & 17;000-lb. GVW,1990-1998 All Makes All Models Ford F53 Class "A" Motor Home with 15;000-; 16;000- & 17;000-lb. GVW,1990-1998 All Makes All Models Ford F53 Class "A" Motor Home with 15;000-; 16;000- & 17;000-lb. GVW SKU: 14ZX3513T
