Ceramic Metallic Coated Headers @ JC Whitney Auto Parts store
Ceramic Metallic Coated Headers
ARMOR*COAT CERAMIC-METALLIC COATED HEADER KIT For 4- and 6-cylinder trucks, vans and off-road vehicles Resists rust and corrosion to extend header's life Increases horsepower?and looks great! Computer designed for easiest installation and best fit A "must" for 4- and 6-cylinder engines equipped with a power-robbing restrictive exhaust manifold. Helps engine "breathe" better to improve performance and fuel economy and to provide the acceleration you need when you need it. Made of 18-gauge mandrel-bent mild steel tubing with thick flanges and surface-ground O-ring exhaust ports. Polished Armor*Coat finish enhances header's appearance; won't discolor like header paint, chrome or conventional coatings; reduces under-hood temperatures for greater engine efficiency and cleans easily. Armor*Coat?a space-age metallic-ceramic coating?is applied to each header. It forms a near metal-to-metal bond after high-temperature curing. Lasts longer than almost any other coating and is super resistant to chipping and peeling. Header, hardware, gaskets and illustrated instructions included. Header bolts not included. TD=Tubing Diameter; CD=Collector Diameter. Note: Will not fit turbocharged vehicles. Shipped separately from factory. Cannot be shipped express. Check local emission laws before ordering. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Flanged collector. (B) Slip-fit collector. (C) With hookups for smog and engine-management sensors. (D) Without smog or engine-management hookups. (E) Includes collector reducer?fabrication required to hook up to exhaust system. (F) Includes header extension to connect to stock system?fabrication may be required. (G) Fits cylinder heads with evenly spaced exhaust ports. (H) Fits cylinder heads with pair exhaust ports. Applications: Mazda MX-6 2.5L; V6 engine; 1-1/2" x 2" SKU: 94ZX9250RF
Adjustable Engine Deflectors
ADJUSTABLE ENGINE DEFLECTORS Deflectors allow air to be drawn across legs and mid-section when in full-open position to provide coolness in warm weather When in full-closed position, deflectors direct air away from driver while letting engine heat provide warmth Contoured deflectors are molded of dark smoke-tinted 3/16" thick acrylic. Shatter and impact resistant. Mount to black epoxy powder-coated steel brackets. Brackets attach to bike frame at existing mounting points. No drilling required. Brackets, chrome-plated trim panels with chrome-plated acorn nuts, hardware and instructions included. Approximately 6-7/8"W x 9-5/8"H. Sold in pairs. Applications:1999-2004 Yamaha V-Star XVS1100 V-Star Custom SKU: 01ZX3000W
Bungee Tie-Down Cords
BUNGEE TIE-DOWN CORDS Stretch to approximately twice original length Available for single or dual bungee tie-down cords Heavy-duty 10mm diam. cords are made of multistrand natural rubber covered with black nylon Steel hooks plastic-coated to prevent mars. Single bungee tie-down is available in 3 lengths. Dual bungee tie-down is two 24"L cords with steel center ring and 4 hooks. Applications: All Makes All Models SKU: 06ZX0487T
Bestop Modular Rack/Tray Storage System
MODULAR RACK/TRAY STORAGE SYSTEM Designed for Jeep� but can be used on any truck or SUV that has a receiver hitch! Provides storage space where it didn't exist before Universal tray attaches to 1-1/4" or 2" receiver hitches with bracket support (sold separately) Secure gear with tie-down straps anchored by installed I-bolts. Thermo-formed polyethylene composite tray is lighter than steel but more impact resistant. Holds up to 200 lbs. when mounted on bracket support. Rounded corners for added safety. Approximately 23-1/2"W x 4-3/4"H x 44"L. Applications: All Makes All Models SKU: 49ZX6810R
Armor Coat Ceramic Metallic Coated Shorty Headers
SHORTY HEADER KITS Replace exhaust manifold perfectly and retain all emission fittings with no modifications! Super-long lasting! Dramatically reduce engine back pressure caused by power-robbing exhaust manifold. Let engine "breathe" better to increase horsepower and improve gas mileage. Feature 3/8" thick flanges and 16-gauge 1-1/2" mandrel-bent primary tubing. MIG-welded "O" rings always ensure perfect seal. CARB EO #D-439 approved for GM, EO #D-439-1 and D-439-3 approved for Dodge and Ford. All headers are 50-state legal except those with (A) which are 49-state legal (CARB EO applied for). Kits include 2 headers, gaskets, header bolts and instructions. Applications:1996 Dodge Dakota with 5.2L or 5.9L,1996-2003 Dodge Pickup - Full Size 1/2-; 3/4- & 1-ton with 5.2L or 5.9L SKU: 81ZX6742T