Headliner - Black w/Adhesive @ The Eastwood Company
Headliner - Black w/Adhesive
Got the Sagging Headliner Blues? Temporary repairs of worn-out headliners with contact cement and tacks are either short-lived or look terrible. Achieve a professional looking repair with the Heads-Up Headliner Kit. This kit includes 1/8" foam backed headliner material measuring 4' 5" wide by 6' long (enough for most cars), 2 dome light clips, instructions on the box, and a 19.04 fluid oz. aerosol can of spray adhesive. SKU: 52220 A Z Category: Styling-Care-& Custom Styling Custom Interior
Interactive Open- End Ratchet Metric
Ratcheting Open End Alden Wrenches - Unique spring loaded slip jaw design allows these wrenches to ratchet with only 30 degrees of swing while increasing grip as force increases. The quality stainless steel construction and slightly wider jaw makes these wrenches rugged and durable. Three pc. double ended set. Fits 10, 12, 13, 14, 15 and 17mm. Imported from China. Lifetime Manufacturer's Warranty. SKU: 28185 Category: Tools & Equipment Shop Tools General Hand Tools
KO-Seal II Primer Sealer Silver Metallic Quart
KO-SEAL II is a two component acrylic urethane primer sealer. KO-SEAL II has two series of products: One series meeting the VOC requirements for National Rule and one series meeting the VOC requirements for SCAQMD Rule 1151. Please choose from either Quart or Gallon. Refer to House of Kolor technical guide for proper mixing and handling procedures. This product cannot be applied over bare metal surfaces of any kind. Ko-Seal II must be applied over sanded and clean primer or properly prepared and sanded previously painted surfaces for proper adhesion. SKU: 8502ZP 003 QT Category: Auto Body House of Kolor Prep/Undercoat
Hotcoat Powder Iridescent Amber 8 oz
Create exciting metallic effects with this iridescent finish! The effect is accentuated when used over dark colors. With five finishes that can be used individually or dry mixed right in the cup, the possible combinations are almost endless. For best results apply base coat of your choice (dark colors produce the most dramatic effect) and cure only long enough to flow out the powder. DO NOT COMPLETELY CURE, as adhesion of the Iridescent topcoat will suffer. Apply Iridescent or blend of Iridescents and cure for 20 minutes at 400 degrees F after flow-out. Cured finish is a smooth high gloss. Made in the USA. SKU: 100 10320 Category: HotCoat Powder Coating Powders Iridescent Colors
7 pc 3/8" Drive Metric Hex Bit Set
Seven Piece Hex Bit Set - These bits are a must when dealing with a variety of automotive applications. All Bits are two piece construction and made from S-2 steel alloy. This Metric Hex bit set come packaged in a plastic rail and includes the following Metric sizes: 3, 4, 5, 6, 7, 8 and 10 mm for use with 3/8" square drive ratchet. Made in China. One year manufacturer's warranty. SKU: 43417 Category: Shop Tools Hand Tools
Hotcoat Fluidizing Attachment
The Fluidizing Attachment slips onto the end of the longer tube that goes inside the powder bottle. This attachment diverts the fluidizing air stream into a random pattern that more readily fluidizes the powder for improved mixing and flow. SKU: 34128 Category: HotCoat Powder Coating Powder Coating Equipment Powder Coating Accessories
