3in Radius Large English Wheel Anvil @ The Eastwood Company

 24Hour-Store.com Online shopping mall



 

Search For:


3in Radius Large English Wheel Anvil

This anvil wheel is capable of forming high crowns (down to a 3"radius curve). Actual Wheel measures approximately 3" diameter by 2" wide.
SKU: 28162
Category: Metal Shop Fabrication English Wheels/Planishing Hammers

Stud Welder T Handle Puller Accessory

Stud Welder T Handle Puller Accessory
SKU: 31041 H
Category: Auto Body Body & Fender Stud Welders

Eastwood 1/3 HP Buff Motor with Economy Pedestal

Eastwood Buff Motor and Stand Set - Perfect for the budget minded enthusiast, rugged enough to be used every day! The new Eastwood motor features sealed case design for durability. This 1/3 HP 3600 RPM comes with 6' 110 VAC power cord. Imported. One-year warranty. The included stand measures 32" high. This Buffer and Stand combination is also available with the 6" Buffing Wheel Shop Kit (13125) at a savings as part number (13312).
SKU: 13308
Category: Metal Buffing & Finishing Buffing Motors/Accessories

Cool Tube Extreme 1/2" Silver - 3' length

Protects wiring, fuel lines, brake lines, etc. from heat up to 750 degrees F. Combines flexibility with maximum thermal protection. Can be easily slit to install on existing hoses or wires.
SKU: 70349
Category: Performance and Tune-Up Drivetrain Heat Control

Resistance Spot Welder With 6 Inch Tongs

Use the same welding techniques as auto makers with this industrial-quality pro shop tool built by Millweld, renowned for quality welding equipment. You can produce permanent spot welds in mild steel (up to 1/8") without carbon electrodes or shielding gas. Spot welds are fast and easy, taking less than 15 seconds per weld. Runs on 110V AC (20 Amp circuit) Shipped with 6" tongs and tips, ready for use. Easily changed accessory tongs make this an incredibly virsatile tool, suitable for many jobs. Weighs less than 30 lbs. and features A 50% DUTY CYCLE. THIS ITEM MAY TAKE 10 DAYS TO 2 WEEKS FOR DELIVERY
SKU: 19098
Category: Metal Shop Welding Welders

#00 Torch Tip

Used for very fine work requiring the smallest possible flame. Jewelry and 24-28 gauge steel.
SKU: 19205
Category: Metal Shop Welding Tips-Wire-Parts



© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.