Metal Trim And Chrome Prep Video @ The Eastwood Company

 24Hour-Store.com Online shopping mall



 

Search For:


Metal Trim And Chrome Prep Video

Learn how to work on autobody with metal trim and chrome prep. VHS format. Approx. 45 minutes.
SKU: 28020
Category: Metal Buffing & Finishing Buffing Books & Videos

Ultra Lite 3 Guage Panel w/ Fuel Light

These hot new Gauge Panels are precision engineered to provide serious drivers with the most effective way to view critical gauges and warning lights. The ultra bright warning lights use a special high strand, high temperature resistance wire for exceptional performance, ease of installation, and weight saving construction. Warning lights are activated as follows: Oil Pressure below 18 psi, Water Temp. above 220deg. F, Fuel Pressure below 4 psi, Oil Temp. above 270deg. F.
SKU: 75073
Category: Auto Accessories and Gifts

Eastwood Rust Encapsulator Aerosol Red 16 oz

NEW Eastwood Rust Encapsulator has been tested by an independent lab to be the most effective rust preventive product yet. Tested against well-known brands, the New Eastwood Rust Encapsulator has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. One 16 oz. net wt. aerosol covers about 10 sq. ft. Contains no isocyanates. Heat resistant up to 400³ F. Made in the USA. Buy 3 or more and save.
SKU: 16040Z
Category: Rust Treatment Rust Prevention Eastwood Rust Encapsulator

2 5/8" 140-280 F liquid Ultra-Lite oil temp(M)

These silver face Liquid Filled gauges contain dampening fluid to ensure that the pointer stays put when the vehicle is pushed to the limit. Each gauge features the preferred 270deg "full sweep" dial design for enhanced visibility. Includes 6 ft. capillary line, and a 1/2" NPT fitting.
SKU: 74721
Category: Performance and Tune-Up AutoMeter Silver

Buff Motor 1 1/2 hp

The 1 1/2 HP 3600 RPM motor with 7/8" shaft is single phase, 60 hz and requires 13.8 amps at 115 vac or 6.9 amps at 230 vac. Overall shaft length is about 30" The distance from housing to end of shaft is 7 1/4". * * Appropriate power chord needs to be attached.
SKU: 13007
Category: Metal Buffing & Finishing Buffing Motors/Accessories

Abrasive Paper 50Pk 2 And 3/4 By 17 And 1/2 240 Gt

Abrasive Paper 50Pk 2 And 3/4 By 17 And 1/2 240 Gt
SKU: 31097
Category: Rust Treatment Rust Removal Mechanical Rust Removal



© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.