Flapdisc Set Of Three 4.5 X 7/8 Inch60 Grit @ The Eastwood Company

 24Hour-Store.com Online shopping mall



 

Search For:


Flapdisc Set Of Three 4.5 X 7/8 Inch60 Grit

Long-lasting zirconia abrasive discs take the place of resin fiber discs and grinding wheels. Help make weld joints almost undetectable and reduces need for final filler. Flap design runs cooler to reduce panel warping and won't gouge metal like ordinary grinding discs. Each flap disc will out last approximately 15 resin discs. Order 1-2 grits coarser than resin fiber discs. Use on your high-speed grinders.
SKU: 19055
Category: Metal Shop Fabrication Prep & Finishing

Fan Deflector For Pro Hotcoat Gun

The Replacement Deflector for the HotCoat PRO gun can be turned to change from verticle to a horizontal fan.
SKU: 58103
Category: HotCoat Powder Coating Powder Coating Equipment Powder Coating Accessories

Seam Sealer Beige Firm Set Cartridge

Duplicate the sealed factory seams on hoods, firewalls, trunks, and floor board Apply to painted or raw steel panels with a standard caulking gun. Sealer sets up in less than 2 minutes and can be painted in 45 minutes. If required, it can be sanded for a smoother finish. Fits regular caulking guns. Imported.
SKU: 31024 Z
Category: Auto Body Panel Repair & Prep Fillers & Seam Sealers

Throttle Body Manifold Adapter

THROTTLE BODY MANIFOLD ADAPTER #60118 - Convert from carburetion to TBI without having to replace your manifold! This adapter bolts on any square or spread bore manifold and accepts any 43mm bore throttle body from 4.3L, 5.0L and 5.7L Chevy engines.
SKU: 60202
Category: Performance and Tune-Up Electrical & Diagnostic Tools & Accessories

Grease Fitting Caps Red pack/100

Keep it Clean. These grease fitting caps snap on and seal out dirt and moisture from entering critical areas thus helping to prolong the life of parts that need to be greased often. They feature a retaining ring that prevents them from being lost while servicing. The caps fit most automotive grease fittings (SAE J534). Both colors come in bags of 100.
SKU: 49057
Category: Styling-Care-& Custom Car Care & Protection Vehicle Storage

Hotcoat Powder Iridescent Amethyst 2 lb

Create exciting metallic effects with this iridescent finish! The effect is accentuated when used over dark colors. With five finishes that can be used individually or dry mixed right in the cup, the possible combinations are almost endless. For best results apply base coat of your choice (dark colors produce the most dramatic effect) and cure only long enough to flow out the powder. DO NOT COMPLETELY CURE, as adhesion of the Iridescent topcoat will suffer. Apply Iridescent or blend of Iridescents and cure for 20 minutes at 400 degrees F after flow-out. Cured finish is a smooth high gloss. Made in the USA.
SKU: 103232LBS
Category: HotCoat Powder Coating Powders Iridescent Colors



© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.