Tight Spot Grinding Kit With Cylinder Abrasives @ The Eastwood Company

 24Hour-Store.com Online shopping mall



 

Search For:


Tight Spot Grinding Kit With Cylinder Abrasives

Everything you need in this money saving kit. Includes two 1/4" x 2 3/4" mandrel. 40 assorted cylinders (80-320 grit) with mandrel.
SKU: 13096
Category: Metal Buffing & Finishing Surface Conditioning Conditioning Kits

Hotcoat Powder Satin Black Hi Temp 8 oz

At Last! High temperature powder for header and exhaust manifold applications! We're pleased to present this range of 4 High Temperature Exhaust System coatings similar in color to our popular liquid high temp coatings. These high silicone content powders withstand temperatures up to 1000 degrees F and offer superior durability when compared to brush and spray-on coatings. Must be applied to clean bare metal. For best results abrasive blast and spray with PRE Painting Prep (10041Z) or acetone. Do not use over surfaces pretreated with any product that leaves a phosphate coating like Oxisolv or Metal Wash.
SKU: 100 10325
Category: HotCoat Powder Coating Powders High Temp Colors

Neutral Safety Backup Switch

NEUTRAL SAFETY BACKUP SWITCH #80175 - Engineered to perform as a neutral safety switch or a backup-light switch by using one of two trigger levers included. Fits GM Turbo 350 and 400 transmissions as well as the 700R4.
SKU: 60313
Category: Performance and Tune-Up Electrical & Diagnostic Switch Controls

Bright Red Paint Touch Up Pen

Get That Show Perfect Finish We've taken 10 of our most popular Eastwood colors and put them in convenient touch up pens. you can touch up any nicks or chips on your prize winning vehicle, great for small detail work too! Quality enamel paints withstand temperatures up to 300 degrees F and dries to the touch in 20 minutes. Great for last minute detailing at the car show!
SKU: 10235 Z
Category: Specialty Coatings Detail Coatings Trim Painting/Touch Up

Hotcoat Bottle And Lid Replacement Set

Use these bottles to store your powder in or for faster color changes.
SKU: 10198B
Category: HotCoat Powder Coating Powder Coating Equipment Powder Coating Accessories

Carbide Burr SC3L Re 3/8X1X1/4 Dbl Round

This rounded end burr measures about 3" long with a 1/4" shaft. Use this burr for working with Steel and Iron. Use (46029) Tree Shaped Burr for working with Aluminum.
SKU: 46173
Category: Metal Shop Fabrication Prep & Finishing



© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.