Final Finish System Sanding Discs Pack of 24 @ The Eastwood Company

24Hour-Store.com Online shopping mall



 

Search For:


Final Finish System Sanding Discs Pack of 24

Sanding Disc for the Final Finish System comes in pkg of 24.
SKU: 34070 E
Category: Specialty Coatings Painting Paint Prep/Touch Up


EW Dekote Paint Stripper Aerosol 12 oz

Safer Stripper - Want to get away from Methylene Chloride and still remove tough urethane, epoxy and powder coatings? Then Eastwood DeKote is the answer. Available in aerosol, qt., gal, 5 and 55 gallon drums this paint remover will not harm steel, aluminum, pot metal die cast, fiberglass and SMC panels. The longer dwell time (30 minutes to 3 hours) means it doesn't work as fast as Methylene Chloride based strippers but it provides time for the remover to penetrate multiple coats. Available in quart,and gallon containers as well as 5 and 55 gallon drums for easy brush-on or dip application.
SKU: 10408 Z
Category: Specialty Coatings Painting Chemical Stripper


Pertronix Ignitor Mallory 37 series Unilite non/VA

Never Change Points Again - The Ignitor from Pertronix takes the place of standard points and fits under the stock distributor cap. Installs in about 15 minutes! Provides a 2:1 improvement over "point type" systems. Experience reliable ignition performance in all weather and rpm conditions. Increases horsepower, fuel economy and spark plug life. This proven technology has been used in race cars, off road vehicles, back yard mechanics and more for over 25 years. Legal in all 50 states and Canada (CARB E.O. #D-57-2).
SKU: 70055
Category: Performance and Tune-Up Ignition Electric Ignition Conversion


SS Gray Hi-Temp Coating 11.75oz. aerosol

Now the same great 1200 degree performance of our original High Temp Manifold Coating is available in convenient aerosol packaging. Each can is sufficient to coat 2 standard cast iron manifolds or about 6 square feet. 2 cans recommended for header systems.
SKU: 10394 Z
Category: Specialty Coatings UnderHood Coatings High Temp/Exhaust Systems


Plastic Welding Rods ABS

The Pack of 16 Replacement ABS welding rods work well with your plastic welding kit for welding this type of material. To identify material type, do a burn test on a shard of plastic. ABS has a sweet odor when it burns. These rods are 1/8" x 8" long. Longer lengths are available upon request. Made in Germany.
SKU: 40002 A
Category: Styling-Care-& Custom Plastic & Glass Repair Plastic Welding


Rectangular Hole Punch 21/32"x15/16"

Rectangular Hole Punch 21/32"x15/16"
SKU: 28067
Category: Metal Shop Fabrication Punching






© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.