Cool Tube Extreme 1/2" Blue - 3' length @ The Eastwood Company Online shopping mall


Search For:

Cool Tube Extreme 1/2" Blue - 3' length

Protects wiring, fuel lines, brake lines, etc. from heat up to 750 degrees F. Combines flexibility with maximum thermal protection. Can be easily slit to install on existing hoses or wires.
SKU: 70351
Category: Performance and Tune-Up Drivetrain Heat Control

2 1/16" Carbon Fiber Air/Fuel ratio gauge(E)

Carbon Fiber electric gauges add a new dimension of style to any type of high performance vehicle. When routing steel braided lines and copper tubing isn't an option, these high quality electric gauges are the perfect choice. Carbon Fiber electric gauges offer the smooth response and accuracy of air core movement, ensuring flawless operation on the street or at the track. Works with most OEM and after market oxygen sensors, if sensor is needed use model 74179.
SKU: 74746
Category: Performance and Tune-Up AutoMeter Carbon Fiber

4pc 6inch head T-Dolly Set

T-Dollies are used "on" or "off" dolly, on the car, or bolted to your workbench to form tight radius bends in trim, body panel style lines, rounding panel edges and more in steel aluminum, copper, brass etc. Machined from 4140 and TIG welded to the mounting post. Polished working surfaces. This set includes four T-Dollies with 6" long working face, in the following diameters: 1/2", 3/4", 1", and 1-1/4".
SKU: 28233
Category: Metal Shop Fabrication Forming

Loaf Style Post Dolly

Much smaller than Forming Heads these cast steel Post Dollies weigh 2-1/2 to 3-1/2lbs and are hand held or mounted in a vise. Each measures about 2-1/2" by 4-1/2". Smooth surfaces allow user to create beautifully finished work.
SKU: 28225
Category: Metal Shop Fabrication Bending

2in Round Goblet Style Buff

The 2" Round Goblet Buff measures about 1 1/2" tall and reaches into small inside radius curves. These buffs have reinforced 1/8" mounting holes and can be attached to the Buff Taper Arbor (13053). Recommended RPM; 2500 - 3600. Imported
SKU: 13320
Category: Metal Finishing/Buffing Buffing Buffs

Mushroom Buff Sisal 3 1/2in w/ 1/4in Mandrel

Mushroom Sisal Buff - Use this sisal buff for aggressive buffing inside recessed areas. 3-1/4" diameter face mounted to composite base with 1/4" mandrel. Maximum RPM 3,000. Use with our Greaseless Compounds for heavy material removal or Emery compound to remove moderate scratches.
SKU: 13361
Category: Metal Finishing/Buffing Buffing Buffs

© ® co. LLC. USA inc. All rights reserved. Blog
With any using link to strongly required.