1 Shot Paint Orange 1/2 Pt @ The Eastwood Company

24Hour-Store.com Online shopping mall



 

Search For:


1 Shot Paint Orange 1/2 Pt

Add the brilliance of these top quality enamel paints to your vehicle's design. They can be applied by airbrush, roller, or airbrush. The choice paint of professionals for pinstriping and lettering because of their excellent flow, durable, long lasting finish.
SKU: 105 37086Z
Category: Auto Body Pinstriping/Airbrushing Pinstriping Paints


Electric Water Pump Relay Kit

ELECTRIC WATER PUMP RELAY KIT #50106 - Kit provides constant voltage to maximize cooling efficiency and protect the main electrical system from damaging amperage overloads.
SKU: 60156
Category: Performance and Tune-Up Electrical & Diagnostic Relay Kits & Connectors


FLG-643 HVLP Gravity Gun - All Metal

Full size metal body with 1-liter aluminum cup, 1.8 mm fluid tip installed on gun, and instructions.This gun comes with a mail in card to receive a free 1.5mm fluid tip. Sprays lacquers, enamels, primers, urethanes and water-borne coatings. Requires 12.5 cfm at 23 psi for 10 psi at the air cap. One-yearmanufacturer's warranty. Imported.
SKU: 34224
Category: Specialty Coatings Painting Paint Guns


Slapping File Medium Cut

An old-time secret for removing dents and/or smoothing body work on hand fabricated panels. The serrated face works in two ways: it shrinks the stretched metal, and highlights high/low spots that require hammer and dolly work. When used as a slapping hammer, with a dolly, files shrink metal to remove high spots. The files can also be used to remove metal.
SKU: 31044
Category: Auto Body Body & Fender Files/Spoons


Abrasive Tapers 120 Grit Pack Of 50

Resin backed and last 3 times longer than standard sandpaper. Safe up to 22,000 rpm. Grind and polish castings, port heads, and finish small parts. Arbor hole is 1/8", use only with mandrels listed. Note: Different sizes and grits available. 80 grit (coarse); 120 grit (medium); 240 grit (fine) 320 grit (extra fine). When working on Aluminum or other soft metals, use Grinder's Grease for a smoother cut. Save by ordering the Tight Spot Grinding Kit or order different size and grits individually from chart.
SKU: 13088
Category: Metal Buffing & Finishing Surface Conditioning Abrasive Rolls & Tapers


Nylon Tubing 6 ft. 1/8" diameter

Nylon Tubing, 6ft., 1/8" dia. Complete with Fittings and Ferrules Only for mechanical pressure gauges up to 200 psi (except fuel pressure gauges).
SKU: 74383
Category: Auto Accessories and Gifts






© 24Hour-Store.com ® co. LLC. USA inc. All rights reserved. Blog
With any using link to 24Hour-Store.com strongly required.