KOSMIC Kolor Components Fast Reducer Quart @ The Eastwood Company
KOSMIC Kolor Components Fast Reducer Quart
Reducers and Retarders for Kosmic Kolor Urethane Enamel and Shimrin Universal Bases.Three drying versions depending on needs and all feature excellent sprayability, fast staged release, good flow out and leveling, and great retention of gloss when dry. The retarder is designed for the Kosmic Urethane system to retard dry time in situations where this would be deemed necessary, such as force drying. May be added to faster reducers to slow their dry time emergency situations. In most cases for temperatures up to 85 degrees F use the RU-310 (8529ZP 001 QT) Fast Reducer. SKU: 8529ZP 001 QT Category: Auto Body House of Kolor Urethane/Polyurethane
2 1/16" 100-250 F Z-Series trans temp gauge(E)
2 1/16" 100-250 F Z-Series trans temp gauge(E) SKU: 74333 Category: Performance and Tune-Up AutoMeter Z-Series
Magna Clamp
Use the Magna Clamp to pull out creases with the Magna Wire (31181) or the Draw Pins (31041C). SKU: 31183 Category: Auto Body Body & Fender Stud Welders
Pitman Arm Puller
Installing or modifying the steering boxes, or just replacing steering box seals? Don't risk damaging the sector shaft or the box casting with makeshift gear pullers, hammering or excessive heat. This puller with heavy duty center screw and drop forged steel yoke is compact enough to fit confined areas and lasts for years. SKU: 49033 Category: Performance and Tune-Up Brakes & Suspension Suspension Tools & Accessories
Scotchcal Paint Protector And Applicator
This thick and heavy-duty self-adhesive urethane film guards against stone chips on rocker panels, hoods, and front and rear fenders. Adheres well, transparent when installed, and can be peeled off without damaging paint. Can also be used as stencil material when abrasive blasting. Roll measures 3 3/4" W x 75" L. Includes instructions and installation blade. SKU: 52082 Category: Styling-Care-& Custom Styling Custom Exterior
Hi-Temp Lab Metal 24 oz
Hi-Temp Lab-metal withstands 1000 degrees F. If hi-temp leveling or filling is needed this is the product to use. Thin with Lab Solvent (10208ZP) to ease spreadability. Typically dries in 24 hours, heat cure at 425³ F for 1 hour before exposing to high temperatures. Great for filling surfaces before powder coating where 2 or more coats are required. Net wt. 24 oz. SKU: 10288 Z Category: HotCoat Powder Coating Powder Coating Equipment Powder Coating Accessories
