Auto Dark American Eagle Welding Helmet @ The Eastwood Company

Solar Powered Welding Helmet from Hobart - No need to use a hand to raise and lower this helmet or worry about replacing batteries. This helmet charges in direct sunlight in about 10 minutes. These new graphic enhanced welding helmets feature new levels of comfort and convenience. Weighing less than a pound, with foam faced adjustable headgear, we think you'll find this to be one of the most comfortable helmets ever. Lens automatically adjusts from a lightly tinted #3 to the preselected #9-#13 shade in 1/16,000 sec. View area 1.85" x 3.85". Made in the USA. Limited 18 month manufacturer's warranty.
SKU: 19140
Category: Metal Shop Welding Welding Helmets

Protects spark plug wires from the extreme temperatures of headers and exhaust manifolds. Withstands 500ΓΊ F direct continuous and up to 1200 degrees F radiant. Eliminates misfires and possible engine damage from burnt wires. Fiberglass composite won't cause misfires by arching. Includes Hi-Temp Shrink Tubes for a sharp, finished appearance. Can be used on any any hose or wire up to 10mm.
SKU: 70389
Category: Performance and Tune-Up Drivetrain Heat Control

Especially useful on the open ends of crimp-on connectors and in the sealing of repairs and splices. Bonds to all metal, plastic, vinyl, rubber, and composite surfaces. Seals pierce holes after using test light. Neater, more convenient than old-fashioned tape. Handy 4 oz. can with applicator.
SKU: 25029 Z
Category: Performance and Tune-Up Electrical & Diagnostic Bulk Wire-Connectors-and Terminals

Got the Sagging Headliner Blues? Temporary repairs of worn-out headliners with contact cement and tacks are either short-lived or look terrible. Achieve a professional looking repair with the Heads-Up Headliner Kit. This kit includes 1/8" foam backed headliner material measuring 4' 5" wide by 6' long (enough for most cars), 2 dome light clips, instructions on the box, and a 19.04 fluid oz. aerosol can of spray adhesive.
SKU: 52221 A Z
Category: Styling-Care-& Custom Styling Custom Interior

May be installed inside vehicle by mounting the isolator in the engine compartment. Includes 4 ft. braided steel hosefrom isolator to gauge. Requires braided stainless steel hose to connect isolator to fuel pressure source and mounting cup.
SKU: 74494
Category: Auto Accessories and Gifts

Scratchless Reassembly - Prevent scratching painted surfaces when replacing doors, fenders, hoods and more. This assortment of high purity nylon wedges meet many assembly/disassembly needs. Set of 3 wedges includes a 2-5/16" wide x 7-7/8" long, a 1-1/8" wide x 7-1/2" long and one 7/8" wide by 10-5/8" long clip/trim remover.
SKU: 52198
Category: Auto Body Body & Fender Body Tools & Accessories